GU128X32D-7003
- 12 -
7.1.2 BS (Back Space)
Code: 08H
Function: The cursor moves to left by one character.
This command effects on the current window selected by “Current window select”.
When MD1 and 2 modes is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character size is in
right side.
-
The cursor moves to left by one
character.
The space for one line is in the
lower side.
The cursor moves to the right end
of one upper line.
Right end
The space for one line is NOT
in the lower side.
The cursor does not move.
When MD3 mode is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character size is in
right side.
-
The cursor moves to right by one
character.
Right end - The cursor does not move.
7.1.3 HT (Horizontal Tab) – 1 character to right
Code: 09H
Function: The cursor moves to right by one character. This command effects on the
current window selected by “Current window select”. The detail of operation is:
When MD1 mode is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character size is in
right side.
-
The cursor moves to right by one
character.
The space for one line is in the
lower side.
The cursor moves to the left end of
one lower line.
Right end
The space for one line is NOT
in the lower side.
The cursor moves to the left end of
top line.
When MD2 mode is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character
size is in right side.
- The cursor moves to right by one character.
The space for one line is in the
lower side.
The cursor moves to the left end of one lower line.
Right end
The space for one line is NOT
in the lower side.
All displayed pattern is scrolled up to one upper line,
displayed pattern of lowest line is cleared. And
cursor moves to left end of bottom line.