GU128X32D-7003
- 21 -
7.1.28 US ( f n [parameter] (Bit image display group)
Function: Execute processing of bit image data.
n: Specifies function code.
7.1.29 <Function 11H> US ( f n xL xH yL yH g d(1)...d(k)
(Real-time bit image display)
Code: 1Fh 28h 66h 11h xL xH yL yH g d(1)...d(k)
n: Classify command
xL: Bit image X size lower byte ( by 1dot)
xH: Bit image X size upper byte ( by 1dot)
yL: Bit image Y size lower byte ( by 8dots)
yH: Bit image Y size upper byte ( by 8dots)
g: Image =1(Fixed)
d(1) - d(k): Image data (Refer to figure as follows)
Definable area: n ＝ 11H
1 ≦ (xL + xH×256) ≦ 256
1 ≦ (yL + yH×256) ≦ 4
g=1
0 ≦ d ≦ 255
k = x X y X g
Function: Display the bit image data inputed on the cursor position real-time.
Cursor position will not change.
When bit image is display on cursor position, and if it overflows from the current window, it is
displayed until edge of area defined, and remaining bit image overflowed is not displayed. If the
Display position or image size e.t.c are defined to out of definable area, the command is ignored,
and the data is valid as standard data.
n Function No. Function
11H Function 11H Real-time bit image display
Display memory
Cursor position
y
