ZSC31010CEG1-R Datasheet ZSC31010CEG1-R, ZSC31010CIG1-R, ZSC31010CIG1-T | P40-P42

ZSC31010 Datasheet

January 20, 2016

7 ESD/Latch-Up-Protection

All pins have an ESD protection of > 4000 V and a latch-up protection of ±100 mA or of +8V/-4 V (to VSS/VSSA).

ESD protection referred to the Human Body Model is tested with devices in SOP-8 packages during product

qualification. The ESD test follows the Human Body Model with 1.5 kΩ/100 pF based on MIL 883, Method 3015.7.

8 Test

The test program is based on this datasheet. The final parameters that will be tested during series production are

listed in the tables of section 1. The digital part of the IC includes a scan path, which can be activated and con-

trolled during wafer test. It guarantees failure coverage of more than 98%. Further test support for testing of the

analog parts on wafer level is included in the DSP.

9 Quality and Reliability

A reliability investigation according to the in-house non-automotive standard has been performed.

10 Customization

For high-volume applications which require an upgraded or downgraded functionality compared to the ZSC31010,

IDT can customize the circuit design by adding or removing certain functional blocks. IDT can provide a custom

solution quickly because it has a considerable library of sensor-dedicated circuitry blocks. Please contact IDT for

further information.

ZSC31010 Datasheet

January 20, 2016

11 Ordering Codes

Sales Code

Description

Package

ZSC31010CEB ZSC31010 Die — Temperature range:-50°C to +150°C Unsawn on Wafer

ZSC31010CEC ZSC31010 Die — Temperature range:-50°C to +150°C Sawn on Wafer Frame

ZSC31010CEG1 ZSC31010 SOP8 (150 mil) — Temperature range:-50°C to +150°C Tube: add “-T” to sales code; reel: add “-R”

ZSC31010CIB ZSC31010 Die — Temperature range: -40°C to 85°C Unsawn on Wafer

ZSC31010CIC ZSC31010 Die — Temperature range: -40°C to 85°C Sawn on Wafer Frame

ZSC31010CIG1 ZSC31010 SOP8 (150 mil) — Temperature range: -40°C to 85°C Tube: add “-T” to sales code

Reel: add “-R”

ZSC31010KIT ZSC31010 ZACwire™ SSC Evaluation Kit: Communication Board, SSC Board, Sensor

Replacement Board, USB Cable, 5 IC Samples

Kit

Contact IDT Sales for support and sales of IDT’s ZSC31010 Mass Calibration System.

12 Related Documents

Document

ZACwire™ SSC Evaluation Kit Documentation for ZSC31010

and ZSC31015

SSC Kits Feature Sheet (includes ordering codes and prices)

Technical Note—ZSC31010, ZSC31015, and ZSSC3015

Calibration Sequence, DLL, and EXE

Visit the ZSC31010 product page at www.IDT.com/ZSC31010 or contact your nearest sales office for the latest

version of these documents.

13 Definitions of Acronyms

Term Description

ADC Analog-to-Digital Converter

AFE Analog Front-End

BUF Buffer

CM Command Mode

CMC Calibration Microcontroller

DAC Digital-to-Digital Converter

DNL Differential Nonlinearity

DSP Digital Signal Processor

DUT Device Under Test

ESD Electrostatic Discharge

ZSC31010 Datasheet

January 20, 2016

Term Description

FSO Full-Scale Output

INL Integrated Nonlinearity

LSB Least Significant Bit

MUX Multiplexer

NOM Normal Operation Mode

OWI One-Wire Interface

POC Power-On Clear

POR Power-On Reset Level

PSRR Power Supply Rejection Ratio

PTAT Proportional To Absolute Temperature

RM Raw Mode

SOT Second Order Term

14 Document Revision History

Revision Date Description

2.44 08-Apr-2010 Clarification of part ordering codes and addition of document revision history.

2.50 27-Jul-2010 Revision of product name from ZMD31010 to ZSC31010.

2.60 11-Nov-2010 Removed reference to mass calibration kit; added footnote to short protection; added special

measurement information (Table 3.3): revised stop bit definition; added EEPROM

specifications to section 1.3 “Electrical Parameters.”

Added Table 6.1 “Storage and Soldering Conditions” to section 6 “Pin Configuration and

Package.”

Corrected equation (2).

Revised trim tolerances in section 2.4.3.

2.70 30-Mar-2011 Revision in “Related Documents” table for the name of the kit document. Revision in Table 6.

to match the maximum temperature range in section 1.1. Updated trim tolerances in sections

4.1 and 4.2. Correction of formula in Table 4.1.

2.80 25-May-2011 Revision of Table 5.1 to add column for defaults as of 48/2008.

Revisions to description of T

SETL

2.81 07-Oct-2011 Revision to sales contact information and product title. Minor edit to “Benefits” section on

page 2

2.82 06-Jul-2012 Revision to sales contact information for ZMD America, Inc.

2.83 05-Dec-2012 Revision to sales contact information for Zentrum Mikroelektronik Dresden AG, Korea Office.

Revision to phone numbers for USA office.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P24 P25-P27 P28-P30 P31-P33 P34-P36 P37-P39 P40-P42 P43-P43

ZSC31010CEG1-R

Mfr. #:

Buy ZSC31010CEG1-R

Manufacturer:

IDT

Description:

Sensor Interface Sensor Signal Conditoner

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

ZSC31010CEG1-R

ZSC31010CEG1-R

Products related to this Datasheet