© 2016 Integrated Device Technology, Inc.
Revision Date Description
2.84 15-Aug-2013 Update for part codes on page 3 and in section 11.
Update for contact information and images
for cover and headers. Update for related documents section.
Update for specification for sensor signal span to 3mV/V to 105mV/V.
Clarification of EEPROM programming temperature specification in table note in section 1.2.
2.90 29-Aug-2013 Revision of certification status in section 9 “Quality and Reliability.” Minor edits.
2.91 01-Nov-2013 Revision of specifications in section 1.2 for “Output Load Capacitance” to add minimum
specification.
Revision of specifications in section 1.2 for “Output Load Resistance.”
Added table note to section 1.2 regarding pull-down resistor.
Added 10nF output cap to all application figures.
Minor edits for clarity.
20-Jan-2016 Changed to IDT branding.
6024 Silver Creek Valley Road
San Jose, CA 95138
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.IDT.com/go/support
DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance
specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The
information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an
implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property
rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the
property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary
. All contents of this document are copyright of Integrated
Device Technology, Inc. All rights reserved.
