LTC4071
16
4071fc
package DescripTion
MSOP (MS8E) 0910 REV I
0.53 ± 0.152
(.021 ± .006)
SEATING
PLANE
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
6. EXPOSED PAD DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH ON E-PAD
SHALL NOT EXCEED 0.254mm (.010") PER SIDE.
0.18
(.007)
0.254
(.010)
1.10
(.043)
MAX
0.22 – 0.38
(.009 – .015)
TYP
0.86
(.034)
REF
0.65
(.0256)
BSC
0° – 6° TYP
DETAIL “A”
DETAIL “A”
GAUGE PLANE
1 2
3
4
4.90 ± 0.152
(.193 ± .006)
8
8
1
BOTTOM VIEW OF
EXPOSED PAD OPTION
7
6
5
3.00 ± 0.102
(.118 ± .004)
(NOTE 3)
3.00 ± 0.102
(.118 ± .004)
(NOTE 4)
0.52
(.0205)
REF
1.68
(.066)
1.88
(.074)
5.23
(.206)
MIN
3.20 – 3.45
(.126 – .136)
1.68 ± 0.102
(.066 ± .004)
1.88 ± 0.102
(.074 ± .004)
0.889 ± 0.127
(.035 ± .005)
RECOMMENDED SOLDER PAD LAYOUT
0.65
(.0256)
BSC
0.42 ± 0.038
(.0165 ± .0015)
TYP
0.1016 ± 0.0508
(.004 ± .002)
DETAIL “B”
DETAIL “B”
CORNER TAIL IS PART OF
THE LEADFRAME FEATURE.
FOR REFERENCE ONLY
NO MEASUREMENT PURPOSE
0.05 REF
0.29
REF
MS8E Package
8-Lead Plastic MSOP, Exposed Die Pad
(Reference LTC DWG # 05-08-1662 Rev I)
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
LTC4071
17
4071fc
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
revision hisTory
REV DATE DESCRIPTION PAGE NUMBER
A 10/10 V
LBD
specification replaced in Electrical Characteristics section. 3
B 4/11 Updated Vishay thermistor part number. 11, 12, 13,
14, 18
C 10/11 Under Note 2, replaced “=” with “≈”.
Updated IPS MFRs part numbers.
Updated the application example.
Updated MFR part number on the Typical Application circuit MEC201-10P.
3
12
12
18
LTC4071
18
4071fc
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
FAX: (408) 434-0507
www.linear.com
LINEAR TECHNOLOGY CORPORATION 2010
LT 1011 REV C • PRINTED IN USA
relaTeD parTs
Typical applicaTion
Typical Application with 100µF Bypass Capacitor to Support Large Load Pulse
PART NUMBER DESCRIPTION COMMENTS
LTC3105 400mA Step-Up Converter with 250mV
Start-Up and Maximum Power Point Control
A High Efficiency Step-Up DC/DC Converter That Can Operate from Input Voltage As
Low As 200mV. A 250mV Start-Up Capability and Integrated Maximum Power Point
Controller (MPPT) Enables Operation Directly from Low Voltage, High Impedance
Alternative Power Sources Such As Photovoltaic Cells, Thermoelectric Generators
(TEGs) and Fuel Cells. A User Programmable MPPC Set Point Maximizes the Energy
That Can Be Extracted from Any Power Source. Burst Mode
®
Operation, with a
Proprietary Self Adjusting Peak Current, Optimizes Converter Efficiency and Output
Voltage Ripple Over All Operating Conditions.
LTC3108/
LTC3108-1
Ultralow Power Step-Up Converter and Power
Manager
A Highly Integrated DC/DC Converter Ideal for Harvesting and Managing Surplus
Energy from Extremely Low Input Voltage Sources Such As TEGs (Thermoelectric
Generators), Thermopiles and Small Solar Cells. The Step-Up Topology Operates
from Input Sources As Low As 20mV. The LTC3108 is Functionally Equivalent to the
LTC3108-1 Except for its Unique Fixed V
OUT
Options.
LTC3388 20V High Efficiency Nanopower Step-Down
Regulator
High Efficiency Step-Down DC/DC Converter with Internal High Side and
Synchronous Power Switches, Draws Only 720nA Typical DC Supply Current at No
Load. 50mA of Load Current, Accurate UVLO Disables Converter and Maintains Low
Quiescent Current State When the Input Voltage Falls Below 2.3V. 10-Lead MSE and
3mm × 3mm DFN Packages.
LTC3588-1 Piezoelectric Energy Harvesting Power Supply
in 3mm × 3mm DFN and MSOP Packages
High Efficiency Hysteretic Integrated Buck DC/DC; 950nA Input Quiescent Current
(Output in Regulation – No Load), 520nA Input Quiescent Current in UVLO, 2.6V to
19.2V Input Operating Range; Integrated Low-Loss Full-Wave Bridge Rectifier, Up to
100mA of Output Current, Selectable Output Voltages of 1.8V, 2.5V, 3.3V or 3.6V.
LTC4054L Standalone Linear Li-Ion Battery Charger in
ThinSOT™
Low Current Version of LTC4054, 10mA ≤ I
CHG
≤ 150mA, Thermal Regulation
Prevents Overheating, C/10 Termination, with Integrated Pass Transistor.
LTC4065L Standalone 250mA Li-Ion Battery Charger in
2mm × 2mm DFN
Low Current Version of LTC4065, 15mA ≤ I
CHG
≤ 250mA, 4.2V, ±0.6% Float Voltage,
High Charge Current Accuracy: 5%.
LTC4070 Li-Ion/Polymer Shunt Battery Charger System Low 450nA Operating Current, 50mA Maximum Internal Shunt Current, Boostable to
500mA with External PFET
LTC4071
BAT
NTCBIAS
NTC
LBSEL
ADJFLOAT
5V TO 12V
100µF
PULSED
200mA
LOAD
GND
165Ω, 0.5W
GMB031009
OR GS NANO
OR MEC201-10P
V
CC
t
ON
= 1ms
+
4071 TA02
*NTHS0402N02N1002F
10k
T*
LOW DUTY CYCLE
SYSTEM LOAD

LTC4071EMS8E#PBF

Mfr. #:
Manufacturer:
Analog Devices / Linear Technology
Description:
Battery Management Li-Ion/Polymer Shunt Battery Charger System with Low Battery Disconnect
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union