IB IL AI 4/EF ...
7252_en_02 PHOENIX CONTACT 22
16.5 Supported Error Codes for the "IB IL" and "Standardized Display" Formats
After an error message, the following errors/messages for "IB IL" and "standardized representation" format are displayed
in words IN2 to IN5 in the status word (error bit):
Supported Error Codes in "IB IL" Format
17 PCP Communication
By default upon delivery, the device is configured according to the default settings listed on page 16. The device can be
configured to suit your application using process data or PCP.
In PCP mode, the device is configured with the "Config Table" object.
17.1 Object Dictionary
Input Data Word (hex) Error
8001 Overrange
8002 Open circuit
8004 Measured value invalid
8020 Sensor and/or analog supply not present
8040 Device faulty
8080 Underrange
For information on PCP communication, please refer to the IBS SYS PCP G4 UM E
(Order No. 2745169) and IBS PCP COMPACT UM E (Order No. 9015349) user manuals.
The IBS CMD (for standard controller boards) and PC WorX (for Field Controllers (FC) and Remote Field
Controllers (RFC)) programs are available for the configuration and parameterization of your INTERBUS
system.
For additional information, please refer to the "IBS CMD SWT G4 UM E" (Order No. 2722250) user manual and
the documention for your applied PC WorX version.
Index Data Type N L Meaning Object Name Rights
0080
hex
Array of Unsigned 16 5 2 Config Table rd/wr
0081
hex
Array of Unsigned 16 4 2 Analog Values rd
N: Number of elements rd: Read access permitted
L: Length of an element in bytes wr: Write access permitted
