OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LPC2220FET144/G,51

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P50
1. General description
The LPC2210/2220 microcontrollers are based on a 16/32-bit ARM7TDMI-S CPU with
real-time emulation and embedded trace support. For critical code size applications, the
alternative 16-bit Thumb mode reduces code by more than 30 % with minimal
performance penalty.
With their 144-pin package, low power consumption, various 32-bit timers, 8-channel
10-bit ADC, PWM channels, and up to nine external interrupt pins these microcontrollers
are particularly suitable for industrial control, medical systems, access control and
point-of-sale. The LPC2210/2220 can provide up to 76 GPIOs depending on bus
configuration. With a wide range of serial communications interfaces, it is also very well
suited for communication gateways, protocol converters and embedded soft modems as
well as many other general-purpose applications.
Remark: Throughout the data sheet, the term LPC2210/2220 will apply to devices with
and without the /01 suffix. The /01 suffix will be used to differentiate LPC2210 devices only
when necessary.
2. Features
2.1 Key features
n 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 and TFBGA144 package.
n 16/64 kB on-chip static RAM (LPC2210/2220).
n Serial bootloader using UART0 provides in-system download and programming
capabilities.
n EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the
on-chip RealMonitor software as well as high-speed real-time tracing of instruction
execution.
n Eight channel 10-bit ADC with conversion time as low as 2.44 µs.
u LPC2210/01 and LPC2220 only: Dedicated result registers for ADC(s) reduce
interrupt overhead. The ADC pads are 5 V tolerant when configured for digital I/O
function(s).
n Two 32-bit timers (LPC2220 and LPC2210/01 also external event counters) with four
capture and four compare channels, PWM unit (six outputs), Real-Time Clock (RTC),
and watchdog.
n Multiple serial interfaces including two UARTs (16C550), Fast I
2
C-bus (400 kbit/s) and
two SPIs.
u LPC2210/01 and LPC2220 only: A Synchronous Serial Port (SSP) with data
buffers and variable length transfers can be selected to replace one SPI.
LPC2210/2220
16/32-bit ARM microcontrollers; flashless, with 10-bit ADC
and external memory interface
Rev. 06 — 11 December 2008 Product data sheet
LPC2210_2220_6 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 06 — 11 December 2008 2 of 50
NXP Semiconductors
LPC2210/2220
16/32-bit ARM microcontrollers
u LPC2210/01 and LPC2220 only: UART0/1 include fractional baud rate generator,
auto-bauding capabilities, and handshake flow-control fully implemented in
hardware.
n Vectored Interrupt Controller (VIC) with configurable priorities and vector addresses.
n Configurable external memory interface with up to four banks, each up to 16 MB and
8/16/32-bit data width.
n Up to 76 general purpose pins (5 V tolerant) capable. Up to nine edge/level sensitive
external interrupt pins available.
u LPC2210/01 and LPC2220 only: Fast GPIO ports enable port pin toggling up to 3.5
times faster than the original device. They also allow for a port pin to be read at any
time regardless of its function.
n 60 MHz (LPC2210) and 75 MHz (LPC2210/01 and LPC2220) maximum CPU clock
available from programmable on-chip Phase-Locked Loop (PLL) with settling time of
100 µs.
n On-chip integrated oscillator operates with external crystal in range of 1 MHz to
25 MHz and with external oscillator up to 25 MHz.
n Power saving modes include Idle and Power-down.
n Processor wake-up from Power-down mode via external interrupt.
n Individual enable/disable of peripheral functions for power optimization.
n Dual power supply:
u CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ± 0.15 V).
u I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.
16/32-bit ARM7TDMI-S processor.
3. Ordering information
Table 1. Ordering information
Type number Package
Name Description Version
LPC2210FBD144 LQFP144 plastic low profile quad flat package; 144
leads; body 20 × 20 × 1.4 mm
SOT486-1
LPC2210FBD144/01 LQFP144 plastic low profile quad flat package; 144
leads; body 20 × 20 × 1.4 mm
SOT486-1
LPC2220FBD144 LQFP144 plastic low profile quad flat package; 144
leads; body 20 × 20 × 1.4 mm
SOT486-1
LPC2220FET144 TFBGA144 plastic thin fine-pitch ball grid array package;
144 balls; body 12 × 12 × 0.8 mm
SOT569-2
LPC2220FET144/G TFBGA144 plastic thin fine-pitch ball grid array package;
144 balls; body 12 × 12 × 0.8 mm
SOT569-2
LPC2210_2220_6 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 06 — 11 December 2008 3 of 50
NXP Semiconductors
LPC2210/2220
16/32-bit ARM microcontrollers
3.1 Ordering options
Table 2. Ordering options
Type number RAM Fast GPIO/
SSP/
Enhanced
UART, ADC,
Timer
Temperature range
LPC2210FBD144 16 kB no −40 °C to +85 °C
LPC2210FBD144/01 16 kB yes −40 °C to +85 °C
LPC2220FBD144 64 kB yes −40 °C to +85 °C
LPC2220FET144 64 kB yes −40 °C to +85 °C
LPC2220FET144/G 64 kB yes −40 °C to +85 °C
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P50

LPC2220FET144/G,51

Mfr. #:
Buy LPC2220FET144/G,51
Manufacturer:
NXP Semiconductors
Description:
ARM Microcontrollers - MCU ARM7 64KR/ADC/EX BUS ROMLESS
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet