OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EPF6010ATI100-2

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P51P52-P52
4 Altera Corporation
FLEX 6000 Programmable Logic Device Family Data Sheet
Table 4 shows FLEX 6000 performance for more complex designs.
Note:
(1) The applications in this table were created using Altera MegaCore
TM
functions.
FLEX 6000 devices are supported by Altera development systems; a
single, integrated package that offers schematic, text (including AHDL),
and waveform design entry, compilation and logic synthesis, full
simulation and worst-case timing analysis, and device configuration. The
Altera software provides EDIF 2 0 0 and 3 0 0, LPM, VHDL, Verilog HDL,
and other interfaces for additional design entry and simulation support
from other industry-standard PC- and UNIX workstation-based EDA
tools.
The Altera software works easily with common gate array EDA tools for
synthesis and simulation. For example, the Altera software can generate
Verilog HDL files for simulation with tools such as Cadence Verilog-XL.
Additionally, the Altera software contains EDA libraries that use device-
specific features such as carry chains which are used for fast counter and
arithmetic functions. For instance, the Synopsys Design Compiler library
supplied with the Altera development systems include DesignWare
functions that are optimized for the FLEX 6000 architecture.
The Altera development system runs on Windows-based PCs, Sun
SPARCstations, and HP 9000 Series 700/800.
f
See the MAX+PLUS II Programmable Logic Development System & Software
Data Sheet and the Quartus Programmable Logic Development System &
Software Data Sheet for more information.
Table 4. FLEX 6000 Device Performance for Complex Designs Note (1)
Application LEs Used Performance Units
-1 Speed
Grade
-2 Speed
Grade
-3 Speed
Grade
8-bit, 16-tap parallel finite impulse response
(FIR) filter
599 94 80 72 MSPS
8-bit, 512-point fast Fourier transform (FFT)
function
1,182 75
63
89
53
109
43
µS
MHz
a16450 universal asynchronous
receiver/transmitter (UART)
487 36 30 25 MHz
PCI bus target with zero wait states 609 56 49 42 MHz
Altera Corporation 5
FLEX 6000 Programmable Logic Device Family Data Sheet
Functional
Description
The FLEX 6000 OptiFLEX architecture consists of logic elements (LEs).
Each LE includes a 4-input look-up table (LUT), which can implement any
4-input function, a register, and dedicated paths for carry and cascade
chain functions. Because each LE contains a register, a design can be easily
pipelined without consuming more LEs. The specified gate count for
FLEX 6000 devices includes all LUTs and registers.
LEs are combined into groups called logic array blocks (LABs); each LAB
contains 10 LEs. The Altera software automatically places related LEs into
the same LAB, minimizing the number of required interconnects. Each
LAB can implement a medium-sized block of logic, such as a counter or
multiplexer.
Signal interconnections within FLEX 6000 devices—and to and from
device pins—are provided via the routing structure of the FastTrack
Interconnect. The routing structure is a series of fast, continuous row and
column channels that run the entire length and width of the device. Any
LE or pin can feed or be fed by any other LE or pin via the FastTrack
Interconnect. See “FastTrack Interconnect” on page 17 of this data sheet
for more information.
Each I/O pin is fed by an I/O element (IOE) located at the end of each row
and column of the FastTrack Interconnect. Each IOE contains a
bidirectional I/O buffer. Each IOE is placed next to an LAB, where it can
be driven by the local interconnect of that LAB. This feature allows fast
clock-to-output times of less than 8 ns when a pin is driven by any of the
10 LEs in the adjacent LAB. Also, any LE can drive any pin via the row and
column interconnect. I/O pins can drive the LE registers via the row and
column interconnect, providing setup times as low as 2 ns and hold times
of 0 ns. IOEs provide a variety of features, such as JTAG BST support,
slew-rate control, and tri-state buffers.
Figure 1 shows a block diagram of the FLEX 6000 OptiFLEX architecture.
Each group of ten LEs is combined into an LAB, and the LABs are
arranged into rows and columns. The LABs are interconnected by the
FastTrack Interconnect. IOEs are located at the end of each FastTrack
Interconnect row and column.
6 Altera Corporation
FLEX 6000 Programmable Logic Device Family Data Sheet
Figure 1. OptiFLEX Architecture Block Diagram
FLEX 6000 devices provide four dedicated, global inputs that drive the
control inputs of the flipflops to ensure efficient distribution of high-
speed, low-skew control signals. These inputs use dedicated routing
channels that provide shorter delays and lower skews than the FastTrack
Interconnect. These inputs can also be driven by internal logic, providing
an ideal solution for a clock divider or an internally generated
asynchronous clear signal that clears many registers in the device. The
dedicated global routing structure is built into the device, eliminating the
need to create a clock tree.
Logic Array Block
An LAB consists of ten LEs, their associated carry and cascade chains, the
LAB control signals, and the LAB local interconnect. The LAB provides
the coarse-grained structure of the FLEX 6000 architecture, and facilitates
efficient routing with optimum device utilization and high performance.
IOEs
IOEs
Row FastTrack
Interconnect
Column FastTrack
Interconnect
Column FastTrack
Interconnect
Row FastTrack
Interconnect
Logic Elements
Local Interconnect
(Each LAB accesses
two local interconnect
areas.)
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P51P52-P52

EPF6010ATI100-2

Mfr. #:
Buy EPF6010ATI100-2
Manufacturer:
Intel / Altera
Description:
FPGA - Field Programmable Gate Array FPGA - Flex 6000 88 LABs 71 IOs
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet