Table 4: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
84 – – – Command set/feature-supported extension
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13 F 1b 1 = Idle immediate with unload feature is supported
12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)
11 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)
10–9 F 00b Obsolete
8 F 1b 1 = 64-bit word wide name is supported
7 F 0b 1 = WRITE DMA QUEUED FUA EXT command is supported
6 F 1b 1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT com-
mands are supported
5 F 1b 1 = General purpose logging feature set is supported
4 F 0b 1 = Streaming feature set is supported
3 F 0b 1 = Media card pass through command feature set is supported
2 F 0b 1 = Media serial number is supported
1 F 1b 1 = SMART self-test is supported
0 F 1b 1 = SMART error logging is supported
85 – – – Command set/feature is enabled
15 X 0b Obsolete
14 F 1b 1 = NOP command is supported
13 F 1b 1 = READ BUFFER command is supported
12 F 1b 1 = WRITE BUFFER command is supported
11 X 0b Obsolete
10 V 1b 1 = Host protected area feature set is enabled
9 F 0b 1 = DEVICE RESET command is supported
8 V 0b 1 = SERVICE interrupt is enabled
7 V 0b 1 = Release interrupt is enabled
6 V 1b 1 = Look-ahead is enabled
5 V 1b 1 = Write cache is enabled
4 F 0b Shall be cleared to zero to indicate that the packet feature set
is not supported
3 F 1b Power management feature set is enabled
2 F 0b Obsolete
1 V 0b 1 = Security mode feature set is enabled,
Default = 0, 1 when TCG enabled
0 V 1b 1 = SMART feature set is enabled
M510DC 2.5-Inch NAND Flash SSD
Device ID
09005aef8633b239
M510DC_2_5_tcge.pdf - Rev. F 9/16 EN
13
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
