Logical Block Address Configuration
The drive is set to report the number of logical block addresses (LBA) that will ensure
sufficient storage space for the specified density. Standard LBA settings, based on the
IDEMA standard (LBA1-02), are shown below.
Table 1: Standard LBA Settings – 512-Byte Sector Size
Drive Size
Total LBA Max LBA
User Available
Bytes
Decimal Hexadecimal Decimal Hexadecimal (Unformatted)
120GB 234,441,648 DF94BB0 234,441,647 DF94BAF 120,034,123,776
240GB 468,862,128 1BF244B0 468,862,127 1BF244AF 240,057,409,536
480GB 937,703,088 37E436B0 937,703,087 37E436AF 480,103,981,056
600GB 1,172,123,568 45DD2FB0 1,172,123,567 45DD2FAF 600,127,266,816
800GB 1,562,824,368 5D26CEB0 1,562,824,367 5D26CEAF 800,166,076,416
960GB 1,875,385,008 6FC81AB0 1,875,385,007 6FC81AAF 960,197,124,096
M510DC 2.5-Inch NAND Flash SSD
Logical Block Address Configuration
09005aef8633b239
M510DC_2_5_tcge.pdf - Rev. F 9/16 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
