Data Sheet ADN2526
Rev. B | Page 7 of 16
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
PIN 1
INDICATOR
1MSET
2CPA
3ALS
4VEE
11 IBMON
12 BSET
10 IBIAS
9 VEE
5VCC
6IMODN
7IMODP
8VCC
15
DATAN
16
VCC
14
DATAP
13
VCC
TOP VIEW
(Not to Scale)
ADN2526
NOTES
1. THE EXPOSED PAD ON THE BOTTOM OF THE PACKAGE
MUST BE CONNECTED TO VCC OR THE GND PLANE.
07511-004
Figure 4. Pin Configuration
Table 4. Pin Function Descriptions
1
1 MSET AI Modulation Current Control Input.
2 CPA AI Adjustable Cross Point. Defaults to not connected (NC) mode (floating).
3 ALS DI Automatic Laser Shutdown.
4 VEE P Negative Power Supply. Normally connected to system ground.
5 VCC P Positive Power Supply.
6 IMODN AI Modulation Current Sink, Negative.
7 IMODP AI Modulation Current Sink, Positive.
9 VEE P Negative Power Supply. Normally connected to system ground.
10 IBIAS AI Bias Current Sink.
11 IBMON AO Bias Current Monitoring Output.
12 BSET AI Bias Current Control Input.
13 VCC P Positive Power Supply.
14 DATAP AI Data Signal Positive Input.
15 DATAN AI Data Signal Negative Input.
16 VCC P Positive Power Supply.
17 (EPAD) Exposed Pad (EPAD) P The exposed pad on the bottom of the package must be connected to VCC or the GND plane.
1
AI = analog input, DI = digital input, P = power, AO = analog output.