15
IDT72V205/72V215/72V225/72V235/72V245 3.3V CMOS SyncFIFO
TM
256 x 18, 512 x 18, 1,024 x 18, 2,048 x 18 and 4,096 x 18
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES
MARCH 2013
NOTES:
1. D = maximum FIFO Depth.
In IDT Standard Mode: D = 256 for the IDT72V205, 512 for the IDT72V215, 1,024 for the IDT72V225, 2,048 for the IDT72V235 and 4,096 for the IDT72V245.
In FWFT Mode:
D = 257 for the IDT72V205, 513 for the IDT72V215, 1,025 for the IDT72V225, 2,049 for the IDT72V235 and 4,097 for the IDT72V245.
2. For IDT Standard Mode.
3. For FWFT Mode.
4. Select this mode by setting (FL, RXI, WXI) = (0,0,0), (0,0,1), (0,1,0), (1,0,0), (1,0,1) or (1,1,0) during Reset.
Figure 15. Half-Full Flag Timing (IDT Standard and FWFT Modes)
Figure 14. Asynchronous Programmable Almost-Full Flag Timing (IDT Standard and FWFT Modes)
NOTES:
1. m = PAF offset.
2. D = maximum FIFO Depth.
In IDT Standard Mode: D = 256 for the IDT72V205, 512 for the IDT72V215, 1,024 for the IDT72V225, 2,048 for the IDT72V235 and 4,096 for the IDT72V245.
In FWFT Mode:
D = 257 for the IDT72V205, 513 for the IDT72V215, 1,025 for the IDT72V225, 2,049 for the IDT72V235 and 4,097 for the IDT72V245.
3. PAF is asserted to LOW on WCLK transition and reset to HIGH on RCLK transition.
4. Select this mode by setting (FL, RXI, WXI) = (0,0,0), (0,0,1), (0,1,0), (0,1,1) or (1,1,1) during Reset.
WCLK
tENS
tENH
WEN
HF
tENS
tHF
RCLK
tHF
REN
4294 drw 15
tCLKL
tCLKH
D/2 words in FIFO
(2)
,
[ + 1] words in FIFO
(3)
D-1
2
D/2 + 1 words in FIFO
(2)
,
[ + 2] words in FIFO
(3)
D-1
2
D/2 words in FIFO
(2)
,
[ + 1] words in FIFO
(3)
D-1
2
WCLK
t
CLKH
t
CLKL
t
ENS
t
ENH
WEN
PAF
t
ENS
t
PAFA
D - (m + 1) words
in FIFO
RCLK
t
PAFA
REN
(1)
4294 drw 14
D - m words
in FIFO
D - (m + 1) words in FIFO
