Philips Semiconductors Product data
P87LPC767
Low power, low price, low pin count (20 pin)
microcontroller with 4-kbyte OTP and 8-bit A/D converter
2002 Mar 25
5
PIN DESCRIPTIONS
MNEMONIC PIN NO. TYPE NAME AND FUNCTION
P0.0–P0.7 1, 13, 14,
16–20
I/O Port 0: Port 0 is an 8-bit I/O port with a user-configurable output type. Port 0 latches are configured in
the quasi-bidirectional mode and have either ones or zeros written to them during reset, as determined
by the PRHI bit in the UCFG1 configuration byte. The operation of port 0 pins as inputs and outputs
depends upon the port configuration selected. Each port pin is configured independently. Refer to the
section on I/O port configuration and the DC Electrical Characteristics for details.
The Keyboard Interrupt feature operates with port 0 pins.
Port 0 also provides various special functions as described below.
1 O P0.0 CMP2 Comparator 2 output.
20 I P0.1 CIN2B Comparator 2 positive input B.
19 I P0.2 CIN2A Comparator 2 positive input A.
18 I P0.3 CIN1B Comparator 1 positive input B.
I AD0 A/D channel 0 input.
17 I P0.4 CIN1A Comparator 1 positive input A.
I AD1 A/D channel 1 input.
16 I P0.5 CMPREF Comparator reference (negative) input.
I AD2 A/D channel 2 input.
14 O P0.6 CMP1 Comparator 1 output.
I AD3 A/D channel 3 input.
13 I/O P0.7 T1 Timer/counter 1 external count input or overflow output.
P1.0–P1.7 2–4, 8–12 I/O Port 1: Port 1 is an 8-bit I/O port with a user-configurable output type, except for three pins as noted
below. Port 1 latches are configured in the quasi-bidirectional mode and have either ones or zeros
written to them during reset, as determined by the PRHI bit in the UCFG1 configuration byte. The
operation of the configurable port 1 pins as inputs and outputs depends upon the port configuration
selected. Each of the configurable port pins are programmed independently. Refer to the section on I/O
port configuration and the DC Electrical Characteristics for details.
Port 1 also provides various special functions as described below.
12 O P1.0 TxD Transmitter output for the serial port.
11 I P1.1 RxD Receiver input for the serial port.
10 I/O
I/O
P1.2 T0 Timer/counter 0 external count input or overflow output.
SCL I
2
C serial clock input/output. When configured as an output, P1.2 is open
drain, in order to conform to I
2
C specifications.
9 I
I/O
P1.3 INT0 External interrupt 0 input.
SDA I
2
C serial data input/output. When configured as an output, P1.3 is open
drain, in order to conform to I
2
C specifications.
8 I P1.4 INT1 External interrupt 1 input.
4 I P1.5 RST External Reset input (if selected via EPROM configuration). A low on this pin
resets the microcontroller, causing I/O ports and peripherals to take on their
default states, and the processor begins execution at address 0. When used
as a port pin, P1.5 is a Schmitt trigger input only.
