RL78/G10 CHAPTER 2 ELECTRICAL SPECIFICATIONS
R01DS0207EJ0100 Rev.1.00
Apr 15, 2013
Page 12 of 28
2.3 DC Characteristics
2.3.1 Pin characteristics
(T
A = −40 to +85°C, 2.0 V ≤ VDD ≤ 5.5 V, VSS = 0 V)
Parameter Symbol Conditions
MIN. TYP. MAX. Unit
P00, P01, P02 to P04, P40 Per pin -10.0
Note 2
mA
4.0 V ≤ VDD ≤ 5.5 V -10.0 mA
2.7 V ≤ VDD < 4.0 V -2.0 mA
P40 Total
Note 3
2.0 V ≤ VDD < 2.7 V -1.5 mA
4.0 V ≤ VDD ≤ 5.5 V -50.0 mA
2.7 V ≤ VDD < 4.0 V -10.0 mA
P00, P01, P02 to P04 Total
Note 3
2.0 V ≤ VDD < 2.7 V -7.5 mA
Output current,
high
Note 1
I
OH1
Total of all pins
Note 3
-60.0 mA
P00 to P04, P40 Per pin 20.0
Note 2
mA
4.0 V ≤ VDD ≤ 5.5 V 20.0 mA
2.7 V ≤ VDD < 4.0 V 3.0 mA
P40 Total
Note 3
2.0 V ≤ VDD < 2.7 V 0.6 mA
4.0 V ≤ VDD ≤ 5.5 V 80.0 mA
2.7 V ≤ VDD < 4.0 V 12.0 mA
P00 to P04 Total
Note 3
2.0 V ≤ VDD < 2.7 V 2.4 mA
Output current,
low
Note 4
I
OL1
Total of all pins
Note 3
100.0 mA
Input voltage, high
V
IH1 0.8 VDD VDD V
Input voltage, low
V
IL1 0 0.2 VDD V
IOH =-10 mA VDD-1.5 V 4.0 V ≤ VDD ≤ 5.5 V
I
OH =-3.0 mA VDD-0.7 V
2.7 V ≤ VDD ≤ 5.5 V IOH =-2.0 mA VDD-0.6 V
Output voltage, high
Note 5
V
OH1
2.0 V ≤ V
DD ≤ 5.5 V IOH =-1.5 mA VDD-0.5 V
IOL = 20 mA 1.3 V 4.0 V ≤ VDD ≤ 5.5 V
I
OL = 8.5 mA 0.7 V
IOL = 3.0 mA 0.6 V 2.7 V ≤ VDD ≤ 5.5 V
IOL = 1.5 mA 0.4 V
Output voltage, low
Note 6
V
OL1
2.0 V ≤ V
DD ≤ 5.5 V IOL = 0.6 mA 0.4 V
Input leakage
current, high
I
LIH1 VI = VDD 1 µA
Input leakage
current,low
I
LIL1 VI = VSS -1 µA
On-chip pull-up
resistance
R
U VI = VSS 10 20 100 kΩ
Notes 1. Value of current at which the device operation is guaranteed even if the current flows from the V
DD pin to an
output pin.
2. Do not exceed the total current value.
3. This is the output current value under conditions where the duty factor ≤ 70%.
The output current value when the duty factor > 70% can be calculated with the following expression (when
changing the duty factor to n%).
