© 2008 Microchip Technology Inc. DS21073K-page 1
24AA65/24LC65/24C65
Device Selection Table
Features:
Voltage Operating Range: 1.8V to 6.0V
- Peak write current 3 mA at 6.0V
- Maximum read current 150 μA at 6.0V
- Standby current 1 μA, typical
Industry Standard Two-Wire Bus Protocol I
2
C™
Compatible
8-Byte Page, or Byte modes Available
2 ms Typical Write Cycle Time, Byte or Page
64-Byte Input Cache for Fast Write Loads
Up to 8 devices may be connected to the same
bus for up to 512K bits total memory
Including 100 kHz (1.8V Vcc < 4.5V) and 400
kHz (4.5V V
CC 6.0V) Compatibility
Programmable Block Security Options
Programmable Endurance Options
Schmitt Trigger, Filtered Inputs for Noise
Suppression
Output Slope Control to Eliminate Ground Bounce
Self-Timed Erase and Write Cycles
Power-on/off Data Protection Circuitry
Endurance:
- 10,000,000 E/W cycles for a High Endurance
Block
- 1,000,000 E/W cycles for a Standard
Endurance Block
Electrostatic Discharge Protection > 4000V
Data Retention > 200 years
8-pin PDIP/SOIJ Packages
Temperature Ranges
Pb-Free and RoHS Compliant
Description:
The Microchip Technology Inc. 24AA65/24LC65/
24C65 (24XX65)* is a “smart” 8K x 8 Serial Electrically
Erasable PROM. This device has been developed for
advanced, low-power applications such as personal
communications, and provides the systems designer
with flexibility through the use of many new user-pro-
grammable features. The 24XX65 offers a relocatable
4K bit block of ultra-high-endurance memory for data
that changes frequently. The remainder of the array, or
60K bits, is rated at 1,000,000 erase/write (E/W) cycles
ensured. The 24XX65 features an input cache for fast
write loads with a capacity of eight pages, or 64 bytes.
This device also features programmable security
options for E/W protection of critical data and/or code
of up to fifteen 4K blocks. Functional address lines
allow the connection of up to eight 24XX65’s on the
same bus for up to 512K bits contiguous EEPROM
memory. Advanced CMOS technology makes this
device ideal for low-power nonvolatile code and data
applications. The 24XX65 is available in the standard
8-pin plastic DIP and 8-pin surface mount SOIJ
package.
Package Types
Part Number VCC Range Page Size Temp. Ranges Packages
24AA65 1.8-6.0V 64 Bytes C P, SM
24LC65 2.5-6.0V 64 Bytes C, I P, SM
24C65 4.5-6.0V 64 Bytes C, I, E P, SM
- Industrial (I) -40°C to +85°C
- Automotive (E) -40°C to +125°C
24XX65
A0
A1
A2
V
SS
1
2
3
4
8
7
6
5
V
CC
NC
SCL
SDA
24XX65
A0
A1
A2
V
SS
1
2
3
4
8
7
6
5
V
CC
NC
SCL
SDA
PDIP
SOIJ
64K I
2
C
Smart Serial
EEPROM
*24XX65 is used in this document as a generic part
number for the 24AA65/24LC65/24C65 devices.
24AA65/24LC65/24C65
DS21073K-page 2 © 2008 Microchip Technology Inc.
Block Diagram Pin Function Table
HV Generator
EEPROM
Array
Page Latches
YDEC
XDEC
Sense Amp.
R/W Control
Memory
Control
Logic
I/O
Control
Logic
SDA
SCL
VCC
VSS
I/O
A2A1A0
Cache
Name Function
A0, A1, A2 User Configurable Chip Selects
V
SS Ground
SDA Serial Address/Data/I/O
SCL Serial Clock
V
CC +1.8V to 6.0V Power Supply
NC No Internal Connection
© 2008 Microchip Technology Inc. DS21073K-page 3
24AA65/24LC65/24C65
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. V
SS ..........................................................................................................-0.6V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-40°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
TABLE 1-1: DC CHARACTERISTICS
FIGURE 1-1: BUS TIMING START/STOP
NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
DC CHARACTERISTICS
V
CC = +1.8V to +6.0V
Commercial (C): T
A =0°C to +70°C
Industrial (I): T
A =-40°C to +85°C
Automotive (E): T
A =-40°C to +125°C
Parameter Sym Min Max Units Conditions
A0, A1, A2, SCL and SDA pins:
High-level input voltage
Low-level input voltage
Hysteresis of Schmitt Trigger inputs
Low-level output voltage
V
IH
VIL
VHYS
VOL
.7 VCC
.05 V
CC
.3 VCC
.40
V
V
V
V
(Note 1)
I
OL = 3.0 mA
Input leakage current I
LI ±1 μAVIN = .1V to VCC
Output leakage current ILO ±1 μAVOUT = .1V to VCC
Pin capacitance
(all inputs/outputs)
CIN, COUT —10pFVCC = 5.0V (Note 1)
T
A = 25°C, FCLK = 1 MHz
Operating current ICC Write
I
CC Read
3
150
mA
μA
V
CC = 6.0V, SCL = 400 kHz
V
CC = 6.0V, SCL = 400 kHz
Standby current ICCS —5μAVCC = 5.0V, SCL = SDA = VCC
A0, A1, A2 = VSS
Note 1: This parameter is periodically sampled and not 100% tested.
TSU:STA
THD:STA
VHYS
TSU:STO
Start Stop
SCL
SDA

24LC65/SM

Mfr. #:
Manufacturer:
Microchip Technology
Description:
EEPROM 8kx8 2.5V Smart
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union