4 DS564F2
CS5341
Confidential Draft
3/11/08
1. CHARACTERISTICS AND SPECIFICATIONS
(All Min/Max characteristics and specifications are guaranteed over the Specified Operating Conditions. Typical
performance characteristics and specifications are derived from measurements taken at typical supply voltages
and T
A
= 25°C.)
SPECIFIED OPERATING CONDITIONS
(GND = 0 V, all voltages with respect to 0 V.)
Notes:
1. This part is specified at typical analog voltages of 3.3 V and 5.0 V. See Analog Characteristics - Com-
mercial Grade and Analog Characteristics - Automotive Grade, below, for details.
ABSOLUTE MAXIMUM RATINGS
(GND = 0 V, All voltages with respect to ground.) (Note 2)
2. Operation beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
3. Any pin except supplies. Transient currents of up to ±100 mA on the analog input pins will not cause
SRC latch-up.
4. The maximum over/under voltage is limited by the input current.
Parameter Symbol Min Typ Max Unit
Power Supplies Analog
Digital
Logic
VA
VD
VL
3.1
3.1
1.7
(Note 1)
3.3
3.3
5.25
5.25
5.25
V
V
V
Ambient Operating Temperature Commercial
Automotive
T
AC
T
AC
-10
-40
-
-
70
85
°C
°C
Parameter Symbol Min Max Units
DC Power Supplies: Analog
Logic
Digital
VA
VL
VD
-0.3
-0.3
-0.3
+6.0
+6.0
+6.0
V
V
V
Input Current (Note 3)
I
in
-10 +10 mA
Analog Input Voltage (Note 4)
V
IN
GND-0.7 VA+0.7 V
Digital Input Voltage (Note 4)
V
IND
-0.7 VL+0.7 V
Ambient Operating Temperature (Power Applied) T
A
-50 +95
°C
Storage Temperature
T
stg
-65 +150 °C
