MC13201 Technical Data, Rev. 1.3,
Freescale Semiconductor 7
5 Electrical Characteristics
5.1 Maximum Ratings
5.2 Recommended Operating Conditions
Table 1. Maximum Ratings
Rating Symbol Value Unit
Power Supply Voltage V
BATT,
V
DDINT
-0.3 to 3.6 Vdc
Digital Input Voltage Vin -0.3 to (V
DDINT
+ 0.3)
RF Input Power P
max
10 dBm
Junction Temperature T
J
125 °C
Storage Temperature Range T
stg
-55 to 125 °C
Note: Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the limits in the Electrical Characteristics
or Recommended Operating Conditions tables.
Note: Meets Human Body Model (HBM) = 2 kV. RF input/output pins have no ESD protection.
Table 2. Recommended Operating Conditions
Characteristic Symbol Min Typ Max Unit
Power Supply Voltage (V
BATT
= V
DDINT
)
1
1
If the supply voltage is produced by a switching DC-DC converter, ripple should be less than 100 mV peak-to-peak.
V
BATT,
V
DDINT
2.0 2.7 3.4 Vdc
Input Frequency f
in
2.405 - 2.480 GHz
Ambient Temperature Range T
A
-40 25 85 °C
Logic Input Voltage Low V
IL
0-30%
V
DDINT
V
Logic Input Voltage High V
IH
70%
V
DDINT
-V
DDINT
V
SPI Clock Rate f
SPI
--8.0MHz
RF Input Power P
max
--10dBm
Crystal Reference Oscillator Frequency (±40 ppm over
operating conditions to meet the 802.15.4 Standard.)
f
ref
16 MHz Only
MC13201 Technical Data, Rev. 1.3,
8 Freescale Semiconductor
5.3 DC Electrical Characteristics
Table 3. DC Electrical Characteristics
(V
BATT
, V
DDINT
= 2.7 V, T
A
= 25 °C, unless otherwise noted)
Characteristic Symbol Min Typ Max Unit
Power Supply Current (V
BATT
+ V
DDINT
)
Off
1
Hibernate
1
Doze (No CLKO)
1 2
Idle
Transmit Mode (0 dBm nominal output power)
Receive Mode
1
To attain specified low power current, all GPIO and other digital IO must be handled properly. See Section 8.3, “Low
Power Considerations.
2
CLKO frequency at default value of 32.786 kHz.
I
leakage
I
CCH
I
CCD
I
CCI
I
CCT
I
CCR
-
-
-
-
-
-
0.2
1.0
35
500
30
37
2.5
22
154
1500
38
45
µA
µA
µA
µA
mA
mA
Input Current (V
IN
= 0 V or V
DDINT
) (All digital inputs) I
IN
--±1µA
Input Low Voltage (All digital inputs) V
IL
0-30%
V
DDINT
V
Input High Voltage (all digital inputs) V
IH
70%
V
DDINT
-V
DDINT
V
Output High Voltage (I
OH
= -1 mA) (All digital outputs) V
OH
80%
V
DDINT
-V
DDINT
V
Output Low Voltage (I
OL
= 1 mA) (All digital outputs) V
OL
0-20%
V
DDINT
V
MC13201 Technical Data, Rev. 1.3,
Freescale Semiconductor 9
5.4 AC Electrical Characteristics
Table 4. Receiver AC Electrical Characteristics
(V
BATT
, V
DDINT
= 2.7 V, T
A
= 25 °C, f
ref
= 16 MHz, unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
Sensitivity for 1% Packet Error Rate (PER) (-40 to +85 °C) SENS
per
--91-dBm
Sensitivity for 1% Packet Error Rate (PER) (+25 °C) - -91 -82 dBm
Saturation (maximum input level) SENS
max
-10-dBm
Channel Rejection for 1% PER (desired signal -82 dBm)
+5 MHz (adjacent channel)
-5 MHz (adjacent channel)
+10 MHz (alternate channel)
-10 MHz (alternate channel)
>= 15 MHz
-
-
-
-
-
31
30
43
41
53
-
-
-
-
-
dB
dB
dB
dB
dB
Frequency Error Tolerance - - 200 kHz
Symbol Rate Error Tolerance - - 80 ppm
Table 5. Transmitter AC Electrical Characteristics
(V
BATT
, V
DDINT
= 2.7 V, T
A
= 25 °C, f
ref
= 16 MHz, unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
Power Spectral Density (-40 to +85 °C) Absolute limit - -47 - dBm
Power Spectral Density (-40 to +85 °C) Relative limit - 47 -
Nominal Output Power
1
1
SPI Register 12 programmed to 0x00BC which sets output power to nominal (-1 dBm typical).
P
out
-5 -1 - dBm
Maximum Output Power
2
2
SPI Register 12 programmed to 0x00FF which sets output power to maximum.
4dBm
Error Vector Magnitude EVM - 20 45 %
Output Power Control Range - 30 - dB
Over the Air Data Rate - 250 - kbps
2nd Harmonic - TBD - dBc
3rd Harmonic - TBD - dBc

MC13201FC

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
RF Transceiver TORO IC NON 802.15.4
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet