MT9V124
CONFIDENTIAL AND PROPRIETARY
NOT FOR PUBLIC RELEASE
www.onsemi.com
25
POWER SEQUENCE
Powering up the sensor requires the supply rails to be
applied in a particular order to ensure sensor start up in a
normal operation and prevent undesired condition such as
latch up from happening. Refer to Figure 29 and Table 18
for detailed timing requirement.
Figure 29. Power-Up Sequence
V
AA
, VDD_IO, VDD_PHY
V
DD
EXTCLK
t
2
t
1
t
3
Internal POR
SCLK
SDATA
t
4
Table 18. POWER UP SIGNAL TIMING
Symbol Parameter Min Typ Max Unit
t1 Delay from VDD to VAA and VDD_IO 0 500 ms
t2 EXTCLK Activation t1 100 ms
t3 Internal POR Duration 70 EXTCLKs
t4 First I
2
C Write 50 EXTCLKs
ODCSP25 2.694x2.694
CASE 570BN
ISSUE A
DATE 17 AUG 201
7
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
http://onsemi.com
1
© Semiconductor Components Industries, LLC, 2002
October, 2002 − Rev. 0
Case Outline Number:
XXX
DOCUMENT NUMBER:
STATUS:
REFERENCE:
DESCRIPTION:
98AON94075F
ON SEMICONDUCTOR STANDARD
ODCSP25 2.694x2.694
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
PAGE 1 OF 2
DOCUMENT NUMBER:
98AON94075F
PAGE 2 OF 2
ISSUE REVISION DATE
O RELEASED FOR PRODUCTION FROM APTINA POD# SOC390 TO ON SEMICON-
DUCTOR. REQ. BY D. TRUHITTE.
30 DEC 2014
A ADDED MISSING PACKAGE DRAWING. REQ. BY M. FORBIS. 17 AUG 2017
© Semiconductor Components Industries, LLC, 2017
August, 2017 − Rev. A
Case Outline Number
:
570BN
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

MT9V124EBKSTCH-GEVB

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Optical Sensor Development Tools VGA 1/4" SOC HB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet