April 2005 1 M9999-041405
KS8721CL Micrel, Inc.
KS8721CL
3.3V Single Power Supply 10/100BASE-TX/FX MII Physical Layer Transceiver
Rev. 1.2
General Description
The KS8721CL is a 10BASE-T, 100BASE-TX, and 100BASE-
FX physical layer transceiver providing MII/RMII interfaces to
MACs and switches. Using a unique mixed-signal design that
extends signaling distance while reducing power consump-
tion, the KS8721CL represents Micrel’s fourth generation
single-port Fast Ethernet PHY.
The KS8721CL contains 10BASE-T physical medium attach-
ment (PMA), physical medium dependent (PMD), and physi-
cal coding sub-layer (PCS) functions. It also has on-chip
10BASE-T output filtering. This eliminates the need for
external filters and allows a single set of line magnetics to be
used to meet requirements for both 100BASE-TX and
10BASE-T.
The KS8721CL automatically configures itself for 100Mbps
or 10Mbps and full- or half-duplex operation, using an on-chip
auto-negotiation algorithm. It is the ideal physical layer
transceiver for 100BASE-TX/10BASE-T applications.
Features
•Single chip 100BASE-TX/100BASE-FX/10BASE-T
physical layer solution
•2.5V CMOS design; 2.5/3.3V tolerance on I/O
•3.3V single power supply with built-in voltage regulator;
Power consumption <340mW (including output driver
current)
Fully compliant to IEEE 802.3u standard
Supports MII and Reduced MII (RMII)
Supports 10BASE-T, 100BASE-TX, and 100BASE-FX
with far-end-fault (FEF) detection
Supports power-down and power-saving modes
Configurable through MII serial management ports or via
external control pins
Supports auto-negotiation and manual selection for
10/100Mbps speed and full-/half-duplex modes
On-chip, built-in, analog front-end filtering for both
100BASE-TX and 10BASE-T
Available in Lead-free and Industrial Temperature
packages.
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Functional Diagram
10/100
Pulse
Shaper
NRZ/NRZI
MLT3 Encoder
Parallel/Serial
Manchester Encoder
4B/5B Encoder
Scrambler
Parallel/Serial
Transmitter
TX+
TX-
Adaptive EQ
Base Line
Wander Correction
MLT3 Decoder
NRZI/NRZ
Clock
Recovery
4B/5B Decoder
Descrambler
Serial/Parallel
Auto
Negotiation
10BaseT
Receiver
Manchester Decoder
Serial/Parallel
PLL
LED
Driver
MII/RMII
Registers
and
Controller
Interface
RX-
RX+
XI
XO
SPD
FDX
ACTIVITY
LINK
Power
Down or
Saving
PWRDWN
RXC
TXD3
TXD0
TXD1
TXD2
RXD3
TXEN
TXC
TXER
MDC
MDIO
COL
CRS
RXER
RXD0
RXD1
RXD2
RXDV
KS8721CL Micrel, Inc.
M9999-041405 2 April 2005
Features (continued)
LED outputs for link, activity, full-/half-duplex, and speed
Supports back-to-back, FX to TX for media converter
applications
Supports MDI/MDI-X auto-crossover
Commercial temperature range: 0°C to +70°C
•Industrial temperature range: –40°C to +85°C
Available in 48-pin LQFP
Ordering Information
Part Number Temp. Range Package Lead Finish
KS8721CL 0°C to +70°C 48-Pin LQFP Standard
KSZ8721CL 0°C to +70°C 48-Pin LQFP Lead-free
April 2005 3 M9999-041405
KS8721CL Micrel, Inc.
Revision History
Revision Date Summary of Changes
0.90 7/20/04 Created.
1.0 10/08/04 Updated series resistance for crystal specification to 40.
1.1 1/27/05 MDIO resistor value changes to 4.7k.
Added note on strapping option pins. Updated bits 1b.0 - 1b.7 to self-clearing.
Updated Electrical characteristics.
Updated reference schematic for strapping option configuration to 3.3V.
Updated bits 1f.4-1f.2 to reserved. Added aditional magnetics to qualified transformer table.
Added reset reference circuit.
1.2 3/16/05 Added RMII timing.
Corrected LED signal references to collision.
Removed KS8721CLI from ordering information.

KSZ8721CL-TR

Mfr. #:
Manufacturer:
Microchip Technology / Micrel
Description:
Ethernet ICs 10/100 BASE-TX/FX Physical Layer Transceiver
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union