OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SL2S5402FUD,003

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P35
1. General description
The ICODE SLIX-S IC is a dedicated chip for smart label applications with the need for a
higher security level, larger memory and/or a product which takes care of the increasing
demand for perfect customer privacy. This IC is the third generation of a product family of
smart label ICs based on the ISO standards ISO/IEC 15693 (Ref. 1
) and ISO/IEC 18000-3
(Ref. 4
), prolonging a successful story of NXP in the field of vicinity identification systems.
The ICODE system offers the possibility of operating labels simultaneously in the field of
the reader antenna (anticollision). It is designed for long range applications.
1.1 Contactless energy and data transfer
Whenever connected to a very simple and easy-to-produce type of antenna (as a result of
the 13.56 MHz carrier frequency) made out of a few windings printed, winded, etched or
punched coil, the ICODE SLIX-S IC can be operated without line of sight up to a distance
of 1.5 m (gate width). No battery is needed. When the smart label is positioned in the field
of an interrogator antenna, the high speed RF communication interface enables data to be
transmitted up to 53 kbit/s.
1.2 Anticollision
An intelligent anticollision function enables several tags to operate in the field
simultaneously. The anticollision algorithm selects each tag individually and ensures that
the execution of a transaction with a selected tag is performed correctly without data
corruption resulting from other tags in the field.
1.3 Security and privacy aspects
• Unique IDentifier (UID):
The UID cannot be altered and guarantees the uniqueness of each label.
• Password protected memory management (Read/Write access):
Pages (1 page = 4 blocks of 4 bytes each) can be protected with a password, which
ensures that only authorized users get read/write access to the protected parts of the
user memory (anti counterfeiting).
• Password protected Label Destroy:
The 32-bit Destroy password enables an addressed label to be destroyed with the
DESTROY SLIX-S command. That status is irreversible and the label will never
respond to any command again.
• Password protected Privacy Mode:
SL2S5302; SL2S5402
ICODE SLIX-S
Rev. 3.2 — 27 August 2012
192132
Product data sheet
COMPANY PUBLIC
SL2S5302_SL2S5402 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.2 — 27 August 2012
192132 2 of 35
NXP Semiconductors
SL2S5302; SL2S5402
ICODE SLIX-S
The 32-bit Privacy password enables a label to be set to the Privacy mode with the
ENABLE PRIVACY command. In this mode the label will not respond to any
command except the command GET RANDOM NUMBER, until it next receives the
correct Privacy password. This mode is especially designed to meet the increasing
demand to take care of the customers privacy.
• Password protected EAS and AFI functionality:
The 32-bit EAS/AFI password enables the addressed label to be set in a mode where
the EAS status, the EAS ID and/or the AFI value can only be changed if the correct
EAS/AFI password is transmitted to the label within the mentioned commands.
2. Features and benefits
2.1 ICODE SLIX-S RF interface (ISO/IEC 15693)
Contactless transmission of data and supply energy (no battery needed)
Operating distance: up to 1.5 m (depending on antenna geometry)
Operating frequency: 13.56 MHz (ISM, world-wide licence freely available)
Fast data transfer: up to 53 kbit/s
High data integrity: 16-bit CRC, framing
True anticollision
Electronic Article Surveillance (EAS)
Application Family Identifier (AFI) supported
Data Storage Format Identifier (DSFID)
ENABLE PRIVACY command with 32-bit Privacy password
DESTROY SLIX-S command with 32-bit Destroy password
Additional fast anticollision read
Write distance equal to read distance
2.2 EEPROM
2048 bits (2 KB), organized in 64 blocks of 4 bytes each, 4 blocks are summed up to
1page
50 years data retention
Write endurance of 100000 cycles
2.3 Security
Unique identifier for each device
Lock mechanism for each user memory block (write protection)
Lock mechanism for DSFID, AFI, EAS
Password (32-bit) protected memory management for Read access
Password (32-bit) protected memory management for Write access
Password (32-bit) protected Label Destroy
Password (32-bit) protected Privacy Mode
Password (32-bit) protected EAS and AFI functionality
SL2S5302_SL2S5402 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet
COMPANY PUBLIC
Rev. 3.2 — 27 August 2012
192132 3 of 35
NXP Semiconductors
SL2S5302; SL2S5402
ICODE SLIX-S
3. Applications
Libraries
Item level tagging in pharmaceutical supply chains
Counterfeit protection for consumer goods
Industrial applications
Asset and document tracking
4. Ordering information
5. Block diagram
Table 1. Ordering information
Type number Package Version
Name Description
SL2S5302FUD wafer sawn, bumped wafer, 120 m, on film frame carrier,
C
i
between LA and LB = 23.5 pF (typical)
-
SL2S5402FUD wafer sawn, bumped wafer, 120 m, on film frame carrier,
C
i
between LA and LB = 97 pF (typical)
-
Fig 1. Block diagram of ICODE SLIX-S
001aam247
MOD
DEMOD
VREG
VDD
Clock
data
in
data
out
R/W
ANALOG
RF INTERFACE
PAD
PAD
LB
LA
RECT
Cres
DIGITAL CONTROL
ANTENNA
ANTICOLLISION
READ/WRITE
CONTROL
ACCESS CONTROL
EEPROM INTERFACE
CONTROL
RF INTERFACE
CONTROL
EEPROM
MEMORY
SEQUENCER
CHARGE PUMP
CLK
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P35

SL2S5402FUD,003

Mfr. #:
Buy SL2S5402FUD,003
Manufacturer:
NXP Semiconductors
Description:
RFID Transponders ICODE SLIX-S
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet