OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AD7705BRUZ-REEL7

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33
Parameter A, S Versions
1
Unit Conditions/Comments
REFERENCE OUTPUT
Output Voltage 2.5 V nom
Initial Tolerance @ 25°C ±1% max
Drift 20 ppm/°C typ
Output Noise 30 µV typ Peak-peak Noise 0.1 Hz to 10 Hz Bandwidth
Line Regulation (AV
DD
)1 mV/V max
Load Regulation 1.5 mV/mA max Maximum Load Current 1 mA
External Current 1 mA max
V
BIAS
INPUT
12
Input Voltage Range AV
DD
– 0.85 × V
REF
See V
BIAS
Input Section
or AV
DD
– 3.5 V max Whichever Is Smaller: +5 V/–5 V or +10 V/0 V
Nominal AV
DD
/V
SS
or AV
DD
– 2.1 V max Whichever Is Smaller; +5 V/0 V Nominal AV
DD
/V
SS
V
SS
+ 0.85 × V
REF
See V
BIAS
Input Section
or V
SS
+ 3 V min Whichever Is Greater; +5 V/–5 V or +10 V/0 V
Nominal AV
DD
/V
SS
or V
SS
+ 2.1 V min Whichever Is Greater; +5 V/0 V Nominal AV
DD
/V
SS
V
BIAS
Rejection 65 to 85 dB typ Increasing with Gain
LOGIC INPUTS
Input Current ±10 µΑ max
All Inputs Except MCLK IN
V
INL
, Input Low Voltage 0.8 V max
V
INH
, Input High Voltage 2.0 V min
MCLK IN Only
V
INL
, Input Low Voltage 0.8 V max
V
INH
, Input High Voltage 3.5 V min
LOGIC OUTPUTS
V
OL
, Output Low Voltage 0.4 V max I
SINK
= 1.6 mA
V
OH
, Output High Voltage DV
DD
– 1 V min I
SOURCE
= 100 µA
Floating State Leakage Current ±10 µA max
Floating State Output Capacitance
13
9 pF typ
TRANSDUCER BURNOUT
Current 4.5 µA nom
Initial Tolerance @ 25°C ±10 % typ
Drift 0.1 %/°C typ
COMPENSATION CURRENT
Output Current 20 µA nom
Initial Tolerance @ 25°C ±4 µA max
Drift 35 ppm/°C typ
Line Regulation (AV
DD
)20 nA/V max AV
DD
= +5 V
Load Regulation 20 nA/V max
Output Compliance AV
DD
– 2 V max
SYSTEM CALIBRATION
Positive Full-Scale Calibration Limit
l4
(1.05 × V
REF
)/GAIN V max GAIN Is the Selected PGA Gain (Between 1 and 128)
Negative Full-Scale Calibration Limit
l4
–(1.05 × V
REF
)/GAIN V max GAIN Is the Selected PGA Gain (Between 1 and 128)
Offset Calibration Limits
15
–(1.05 × V
REF
)/GAIN V max GAIN Is the Selected PGA Gain (Between 1 and 128)
Input Span
15
0.8 × V
REF
/GAIN V min GAIN Is the Selected PGA Gain (Between 1 and 128)
(2.1 × V
REF
)/GAIN V max GAIN Is the Selected PGA Gain (Between 1 and 128)
NOTES
12
The AD7710 is tested with the following V
BIAS
voltages. With AV
DD
= 5 V and V
SS
= 0 V, V
BIAS
= 2.5 V; with AV
DD
= 10 V and V
SS
= 0 V, V
BIAS
= 5 V; and with
AV
DD
= 5 V and V
SS
= –5 V, V
BIAS
= 0 V.
13
Guaranteed by design, not production tested.
14
After calibration, if the analog input exceeds positive full scale, the converter will output all 1s. If the analog input is less than negative full scale then the device will
output all 0s.
15
These calibration and span limits apply, provided the absolute voltage on the analog inputs does not exceed AV
DD
+ 30 mV or go more negative than V
SS
– 30 mV.
The offset calibration limit applies to both the unipolar zero point and the bipolar zero point.
REV. G
–3–
AD7710
Parameter A, S Versions
l
Unit Conditions/Comments
POWER REQUIREMENTS
Power Supply Voltages
AV
DD
Voltage
16
5 to 10 V nom ±5% for Specified Performance
DV
DD
Voltage
17
5V nom ±5% for Specified Performance
AV
DD
-V
SS
Voltage 10.5 V max For Specified Performance
Power Supply Currents
AV
DD
Current 4 mA max
DV
DD
Current 4.5 mA max
V
SS
Current 1.5 mA max V
SS
= –5 V
Power Supply Rejection
18
Rejection w.r.t. AGND; Assumes V
BIAS
Is Fixed
Positive Supply (AV
DD
and DV
DD
) See Note 19 dB typ
Negative Supply (V
SS
)90 dB typ
Power Dissipation
Normal Mode 45 mW max AV
DD
= DV
DD
= 5 V, V
SS
= 0 V; Typically 25 mW
52.5 mW max AV
DD
= DV
DD
= 5 V, V
SS
= –5 V; Typically 30 mW
Standby (Power-Down) Mode 15 mW max AV
DD
= DV
DD
= 5 V, V
SS
= 0 V or –5 V; Typically 7 mW
NOTES
16
The AD7710 is specified with a 10 MHz clock for AV
DD
voltages of +5 V ±5%. It is specified with an 8 MHz clock for AV
DD
voltages greater than 5.25 V and less
than 10.5 V. Operating with AV
DD
voltages in the range 5.25 V to 10.5 V is only guaranteed over the 0 °C to 70°C temperature range.
17
The ± 5% tolerance on the DV
DD
input is allowed provided that DV
DD
does not exceed AV
DD
by more than 0.3 V.
18
Measured at dc and applies in the selected passband. PSRR at 50 Hz will exceed 120 dB with filter notches of 10 Hz, 25 Hz, or 50 Hz. PSRR at 60 Hz will exceed
120 dB with filter notches of 10 Hz, 30 Hz or 60 Hz.
19
PSRR depends on gain: Gain of 1: 70 dB typ; Gain of 2: 75 dB typ; Gain of 4: 80 dB typ; Gains of 8 to 128: 85 dB typ. These numbers can be improved (to 95 dB
typ) by deriving the V
BIAS
voltage (via Zener diode or reference) from the AV
DD
supply.
Specifications subject to change without notice.
Digital Input Voltage to DGND . . . . . –0.3 V to AV
DD
+ 0.3 V
Digital Output Voltage to DGND . . . . –0.3 V to DV
DD
+ 0.3 V
Operating Temperature Range
Commercial (A Version) . . . . . . . . . . . . . . . –40°C to +85°C
Extended (S Version) . . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 10 secs) . . . . . . . . . . . . . 300°C
Power Dissipation (Any Package) to +75°C . . . . . . . . 450 mW
Derates Above +75°C . . . . . . . . . . . . . . . . . . . . . . . . 6 mW/°C
*Stresses above those listed under Absolute Maximum Ratings may cause
permanent damage to the device. This is a stress rating only; functional operation
of the device at these or any other conditions above those listed in the operational
sections of the specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
ABSOLUTE MAXIMUM RATINGS*
(T
A
= 25°C, unless otherwise noted.)
AV
DD
to DV
DD
. . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +12 V
AV
DD
to V
SS
. . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +12 V
AV
DD
to AGND . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +12 V
AV
DD
to DGND . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +12 V
DV
DD
to AGND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V
DV
DD
to DGND . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V
V
SS
to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –6 V
V
SS
to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –6 V
Analog Input Voltage to AGND
. . . . . . . . . . . . . . . . . . . . . . . . . V
SS
– 0.3 V to AV
DD
+ 0.3 V
Reference Input Voltage to AGND
. . . . . . . . . . . . . . . . . . . . . . . . . V
SS
– 0.3 V to AV
DD
+ 0.3 V
REF OUT to AGND . . . . . . . . . . . . . . . . . . . . –0.3 V to AV
DD
AD7710–SPECIFICATIONS
REV. G
–4–
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD7710 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
AD7710
REV. G
–5–
(DV
DD
= +5 V ⴞ 5%; AV
DD
= +5 V or +10 V
3
ⴞ 5%; V
SS
= 0 V or –5 V ⴞ 10%; AGND = DGND =
0 V; f
CLK IN
=10 MHz; Input Logic 0 = 0 V, Logic 1 = DV
DD
, unless otherwise noted.)
TIMING CHARACTERISTICS
1,
2
Limit at T
MIN
, T
MAX
Parameter (A, S Versions) Unit Conditions/Comments
f
CLK IN
4,
5
Master Clock Frequency: Crystal Oscillator or Externally
400 kHz min Supplied for Specified Performance
10 MHz max AV
DD
= +5 V ± 5%
8 MHz max AV
DD
= +5.25 V to +10.5 V
t
CLK IN LO
0.4 × t
CLK IN
ns min Master Clock Input Low Time. t
CLK IN
= 1/f
CLK IN
t
CLK IN HI
0.4 × t
CLK IN
ns min Master Clock Input High Time
t
r
6
50 ns max Digital Output Rise Time. Typically 20 ns
t
f
6
50 ns max Digital Output Fall Time. Typically 20 ns
t
1
1000 ns min SYNC Pulse Width
Self-Clocking Mode
t
2
0 ns min DRDY to RFS Setup Time
t
3
0 ns min DRDY to RFS Hold Time
t
4
2 × t
CLK IN
ns min A0 to RFS Setup Time
t
5
0 ns min A0 to RFS Hold Time
t
6
4 × t
CLK IN
+ 20 ns max RFS Low to SCLK Falling Edge
t
7
7
4 × t
CLK IN
+ 20 ns max Data Access Time (RFS Low to Data Valid)
t
8
7
t
CLK IN
/2 ns min SCLK Falling Edge to Data Valid Delay
t
CLK IN
/2 + 30 ns max
t
9
t
CLK IN
/2 ns nom SCLK High Pulse Width
t
10
3 × t
CLK IN
/2 ns nom SCLK Low Pulse Width
t
14
50 ns min A0 to TFS Setup Time
t
15
0 ns min A0 to TFS Hold Time
t
16
4 × t
CLK IN
+ 20 ns max TFS to SCLK Falling Edge Delay Time
t
17
4 × t
CLK IN
ns min TFS to SCLK Falling Edge Hold Time
t
18
0 ns min Data Valid to SCLK Setup Time
t
19
10 ns min Data Valid to SCLK Hold Time
NOTES
1
Guaranteed by design, not production tested. All input signals are specified with tr = tf = 5 ns (10% to 90% of 5 V) and timed from a voltage level of 1.6 V.
2
See Figures 10 to 13.
3
The AD7710 is specified with a 10 MHz clock for AV
DD
voltages of 5 V ± 5%. It is specified with an 8 MHz clock for AV
DD
voltages greater than 5.25 V and less
than 10.5 V.
4
CLK IN duty cycle range is 45% to 55%. CLK IN must be supplied whenever the AD7710 is not in STANDBY mode. If no clock is present in this case, the device
can draw higher current than specified and possibly become uncalibrated.
5
The AD7710 is production tested with f
CLK IN
at 10 MHz (8 MHz for AV
DD
> 5.25 V). It is guaranteed by characterization to operate at 400 kHz.
6
Specified using 10% and 90% points on waveform of interest.
7
These numbers are measured with the load circuit of Figure 1 and defined as the time required for the output to cross 0.8 V or 2.4 V.
ORDERING GUIDE
Temperature Package
Model
1
Range Options
2
AD7710AN –40°C to +85°C N-24
AD7710AR –40°C to +85°C R-24
AD7710AR-REEL –40°C to +85°C R-24
AD7710AR-REEL7 –40°C to +85°C R-24
AD7710ARZ
3
–40°C to +85°C R-24
AD7710ARZ-REEL
3
–40°C to +85°C R-24
AD7710ARZ-REEL7
3
–40°C to +85°C R-24
AD7710AQ –40°C to +85°C Q-24
AD7710SQ –55°C to +125°C Q-24
EVAL-AD7710EB Evaluation Board
NOTES
1
Contact your local sales office for military data sheet and availability.
2
N = PDIP; Q = CERDIP; R = SOIC.
3
Z = Pb-free part.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33

AD7705BRUZ-REEL7

Mfr. #:
Buy AD7705BRUZ-REEL7
Manufacturer:
Analog Devices Inc.
Description:
Analog to Digital Converters - ADC 3V/5V 1mW 2-Ch Diff 16-Bit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet