21
COMMERCIAL TEMPERATURE RANGE
IDT72V71643 3.3V TIME SLOT INTERCHANGE
DIGITAL SWITCH 4,096 x 4,096
Symbol Parameter Min. Typ. Max. Units
ICC
(2)
Supply Current - - 75 mA
IIL
(3,4)
Input Leakage (input pins) - - 60 μA
IOZ
(3,4)
High-impedance Leakage - - 60 μA
VOH
(5)
Output HIGH Voltage 2.4 - - V
V
OL
(6)
Output LOW Voltage - - 0.4 V
Symbol Rating Level Unit
VTT TTL Threshold 1.5 V
VHM TTL Rise/Fall Threshold Voltage HIGH 2.0 V
V
LM TTL Rise/Fall Threshold Voltage LOW 0.8 V
DC ELECTRICAL CHARACTERISTICS
AC ELECTRICAL CHARACTERISTICS - TIMING PARAMETER
MEASUREMENT VOLTAGE LEVELS
NOTES:
1. Voltages are with respect to ground (GND) unless otherwise stated.
2. Outputs unloaded.
3. 0 ≤ V ≤ V
CC.
4. Maximum leakage on pins (output or I/O pins in high-impedance state) is over an applied voltage (V).
5. IOH = 10 mA.
6. IOL = 10 mA.
S1 is open circuit except when testing output
levels or high-impedance states.
S2 is switched to V
CC or GND when testing
output levels or high-impedance states.
Figure 9. Output Load
Symbol Parameter Min. Max. Unit
VCC Supply Voltage 3.0 3.6 V
Vi Voltage on Digital Inputs GND -0.3 5.3 V
IO Current at Digital Outputs -50 50 mA
TS Storage Temperature -55 +125 °C
P
D Package Power Dissapation ⎯ 2W
NOTE:
1. Exceeding these values may cause permanent damage. Functional operation under
these conditions is not implied.
ABSOLUTE MAXIMUM RATINGS
(1)
RECOMMENDED OPERATING
CONDITIONS
(1)
NOTE:
1. Voltages are with respect to Ground unless otherwise stated.
Symbol Parameter Min. Typ. Max. Unit
VCC Positive Supply 3.0 3.3 3.6 V
VIH Input HIGH Voltage 2.0 ⎯ 5.3 V
VIL Input LOW Voltage ⎯⎯0.8 V
T
OP Operating Temperature -40 25 +85 °C
Commercial
Test Point
Output
Pin
C
L
GND
S
1
R
L
VCC
GND
5902 drw11
S
2
