© PHOENIX CONTACT 2012-05-08
8466_en_01
IB IL TEMP 4/8 RTD-EF-XC-PAC
Data sheet
1 Function description
The terminal is designed for use within an Inline station. This
terminal provides an 8-channel input module with three lin-
ear resistance ranges for resistance temperature detectors.
This terminal supports, for example:
– Platinum and nickel sensors, e.g., Pt100, Pt1000,
Ni100, and Ni1000 according to the DIN IEC 60751
standard and to the SAMA RC 21-4-1966 guideline
– KTY81 and KTY84 sensors
– Cu10, Cu50, and Cu53 sensors
Communication either via
– Parameter channel (PCP), all eight measuring chan-
nels, or
– Four process data words; always four channels
(four 16-bit values) using the multiplex method
Thanks to special engineering measures and tests, the ter-
minal can be used under extreme ambient conditions.
Features
– Connection of eight RTD temperature sensors and lin-
ear resistors in 4-wire technology
– High precision and noise immunity
– Temperature stability
– High-resolution temperature and resistance measure-
ment
– Resistance values (R
0
) can be preset separately using
configuration bits
– Channels are configured independently of one another
using the bus system.
– Configuration of open circuit detection sensitivity (firm-
ware 1.10 or later)
– Additional representation in float format according to
IEEE 754
– Diagnostic and status indicators
– Channel scout functionality, e.g., for optical channel
identification during startup
– Can be used under extreme ambient conditions
–Painted PCBs
– Extended temperature range T2 (-40°C … +55°C)
This data sheet is only valid in association with the IL SYS INST UM E user manual.
Make sure you always use the latest documentation.
It can be downloaded at www.phoenixcontact.net/catalog
.
Inline Modular analog input terminal,
version for extreme conditions,
8 inputs, RTD
