9©2016 Integrated Device Technology, Inc January 6, 2016
843S304I-100 Data Sheet
AC Electrical Characteristics
Table 8. AC Characteristics, V
CC
= 3.3V ± 5%, T
A
= -40°C to 85°C
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. Device will meet specifications after thermal equilibrium has
been reached under these conditions.
NOTE 1: Refer to phase noise plot.
NOTE 2: RMS jitter after applying the two evaluation bands to the two transfer functions defined in the Common Clock Architecture and
reporting the worst case results for each evaluation band. Maximum limit for PCI Express Generation 2 is 3.1ps rms for t
REFCLK_HF_RMS
(High
Band) and 3.0 ps RMS for t
REFCLK_LF_RMS
(Low Band). See IDT Application Note PCI Express Reference Clock Requirements and also the
PCI Express Application section of this datasheet which show each individual transfer function and the overall composite transfer function.
Symbol Parameter Test Conditions Minimum Typical Maximum Units
f
MAX
Output Frequency 95 105 MHz
f
REF
Reference Frequency 25 MHz
tjit(Ø)
Phase Jitter, RMS (Random);
NOTE 1
100MHz, SSC Off
Integration Range: 12kHz – 20MHz
1.01 ps
t
REFCLK_HF_RMS
Phase Jitter, RMS; NOTE 2
25MHz crystal input, SSC Off
High Band: 1.5MHz - Nyquist
(clock frequency/2)
2.2 ps
t
REFCLK_LF_RMS
Phase Jitter, RMS; NOTE 2
25MHz crystal input, SSC Off
Low Band: 10kHz - 1.5MHz
0.2 ps
t
R
/ t
F
Output Rise/Fall Time 20% to 80% 600 900 ps
odc Output Duty Cycle 49 51 %