26
SAM9N12/SAM9CN11/SAM9CN12 [SUMMARY DATASHEET]
11063HS–ATARM–27-Sep-13
Revision History
In the table that follows, the most recent version of the document appears first.
“rfo” indicates changes requested during the document review and approval loop.
Doc. Rev Comments Change
Request
Ref.
11063HS
“Description”, revised content and presentation.
Section 1. “Features”:
- added a list on safety features
- moved SHA references to “Safety” list
Section 3. “Signal Description”:
- removed references to VBG pins in Table 3-1, “Signal Description List”
- removed Table 3-2 SAM9N12/CN11/CN12 I/O Type Description
Table 6-1, “SAM9N12/CN11/CN12 Ordering Information”:
- added MRL and Carrier Type columns
- added ordering codes for MRLB
rfo
rfo
8531/rfo
rfo
11063GS
Table 6-1, “SAM9N12/CN11/CN12 Ordering Information” updated with new ordering codes for
BGA247 packages.
Section “Description” put before Section 1. “Features”.
Sections 5 to 9 deleted (5 Power Considerations, 6 Memories, 7 System Controller, 8 Peripherals,
9 Embedded Peripherals).
8804
rfo
11063FS
Added “Write Protected Registers in Section 1. “Features”.
Product name updated to SAM9N12/SAM9CN11/SAM9CN12.
Section “Description” updated with the various devices configurations: device configuration table
added.
Bullets for SAM9CN11 and SAM9N12 added in Section 7.3 “Chip Identification”.
Ordering codes added for SAM9N12 and SAM9CN11 in Table 6-1, “SAM9N12/CN11/CN12
Ordering Information”.
8213
8244
11063ES
Section 1. “Features”, Memories, “Boot on NANDFlash, SDCard, DataFlash or serial DataFlash.
Programmable order” removed.
Section “Description”, 125 MHz --> 133 MHz
“FIPS PUB 46-3 compliant TDES” removed from 3rd paragraph
Table 3-1, “Signal Description List”, NFD0-NFD16 --> NFD0-NFD15
Section 7.3 “Chip Identification”, Chip ID: 0x819A_05A0 --> 0x819A_05A1
Table 8-1, “SAM9N12/CN11/CN12 Peripheral Identifiers”, Replaced keyword ‘Reserved’ on 4th
row with ‘FUSE’
Section 9.8 “Power Management Controller (PMC)”, 250MHz DDR --> 133 MHz DDR
rfo
7928
rfo
rfo
rfo
8039
7975
11063DS
Section 1. “Features”,
Updated...”Processor running up to 400 MHz...”
Updated...”System running up to 133 MHz...”
Back page:
Updated point of contact information.
7847
Marcom
