This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to
change without notice.
December 2014 DocID027271 Rev 1 1/22
STGIPN3H60-E
SLLIMM™-nano (small low-loss intelligent molded module)
IPM, 3 A - 600 V 3-phase IGBT inverter bridge
Datasheet
-
preliminary data
Features
• IPM 3 A, 600 V, 3-phase IGBT inverter bridge
including control ICs for gate driving and
freewheeling diodes
• Optimized for low electromagnetic interference
• V
CE(sat)
negative temperature coefficient
• 3.3 V, 5 V, 15 V CMOS/TTL inputs
comparators with hysteresis and pull down/pull
up resistors
• Undervoltage lockout
• Internal bootstrap diode
• Interlocking function
• Smart shutdown function
• Comparator for fault protection against
overtemperature and overcurrent
• Op amp for advanced current sensing
• Optimized pinout for easy board layout
• ESD voltage (HBM C=100 pF, R=1.5 kȍ) up to
±2 kV
Applications
• 3-phase inverters for motor drives
• Dish washers, refrigerator compressors,
heating systems, air-conditioning fans,
draining and recirculation pumps
Description
This intelligent power module implements a
compact, high performance AC motor drive in a
simple, rugged design. It is composed of six
IGBTs with freewheeling diodes and three half-
bridge HVICs for gate driving, providing low
electromagnetic interference (EMI) characteristics
with optimized switching speed. The package is
optimized for thermal performance and
compactness in built-in motor applications, or
other low power applications where assembly
space is limited. This IPM includes an operational
amplifier, completely uncommitted, and a
comparator that can be used to design a fast and
efficient protection circuit. SLLIMM™ is a
trademark of STMicroelectronics.
NDIP-26L
Table 1. Device summary
Order code Marking Package Packaging
STGIPN3H60-E GIPN3H60-E NDIP-26L Tube
www.st.com
