NB3N1200K, NB3W1200L
www.onsemi.com
25
Termination of Differential Outputs
Table 31. NB3N1200K RESISTIVE LUMPED TEST LOADS FOR DIFFERENTIAL CLOCKS
Clock Board Trace Impedance R
s
R
p
RI
ref
Units
DIFF Clocks –
50 W configuration
100
33
5%
49.9
1%
475
1%
W
DIFF Clocks –
43 W configuration
85
27
5%
42.2
1%
412
1%
W
Table 32. NB3W1200L RESISTIVE LUMPED TEST LOADS FOR DIFFERENTIAL CLOCKS
Clock Board Trace Impedance R
s
R
p
RI
ref
Units
DIFF Clocks –
50 W configuration
100
33
5%
N/A N/A
W
DIFF Clocks –
43 W configuration
85
27
5%
N/A N/A
W
Termination of Differential HCSL Type Outputs (NB3N1200K)
Figure 19. 0.7 V Configuration Test Load Board Termination for HCSL NB3N1200K
NB3N1200K
CLOCK
1%
2 pF
5%
2 pF
5%
RpRp
Rs
Rs
TLA = 10 in.
TLA = 10 in.
CLOCK#
475 W
Termination of Differential NMOS Push− Pull Type Outputs (NB3W1200L)
Figure 20. 0.7 V Configuration Test Load Board Termination for NMOS Push−Pull NB3W1200L
NB3W1200L
Clock
Rs
Rs
Source Terminated
2 pF
2 pF
Receiver
Clock#
T−Line 10 Typical
T−Line 10 Typical
NB3N1200K, NB3W1200L
www.onsemi.com
26
PACKAGE DIMENSIONS
QFN64 9x9, 0.5P (PUNCH & SAWN)
CASE 485DH
ISSUE O
SOLDERING FOOTPRINT
DIMENSIONS: MILLIMETERS
9.30
6.40
6.40
0.50
0.62
0.32
64X
64X
PITCH
9.30
PACKAGE
OUTLINE
RECOMMENDED
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSIONS: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.15 AND 0.25mm FROM THE TERMINAL TIP
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
5. ALL DIMENSIONS APPLY TO BOTH THE
SAWN AND PUNCH PACKAGES.
DIM MIN MAX
MILLIMETERS
A 0.80 1.00
A1 0.00 0.05
A3 0.20 REF
b 0.18 0.30
D 9.00 BSC
D2 5.90 6.25
E 9.00 BSC
6.25E2 5.90
e 0.50 BSC
L 0.30 0.50
L1 0.00 0.15
L1
DETAIL A
L
ALTERNATE
CONSTRUCTIONS
L
DETAIL B
MOLD CMPDEXPOSED Cu
ALTERNATE
CONSTRUCTION
TOP VIEW
A
B
PIN ONE
INDICATOR
ALTERNATE CONSTRUCTION
0.15 C
TOP VIEW
D
A B
E
0.15 C
PIN ONE
INDICATOR
2X
2X
SEATING
A3
A
A1
SIDE VIEW
0.10
C
0.08 C
C
PLANE
NOTE 4
A3
SIDE VIEW
DETAIL B
ALTERNATE CONSTRUCTION
ALTERNATE CONSTRUCTION
1
64
BOTTOM VIEW
17
33
49
1
64
BOTTOM VIEW
17
33
49
D2
A
M
0.10 BC
L
64X
E2
A
M
0.10 BC
b
64X
e
e/2
NOTE 3
A
M
0.10 BC
M
0.05 C
DETAIL A
DETAIL C
DETAIL C
ALTERNATE
CONSTRUCTION
L
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
NB3N1200K/D
Intel is a registered trademark of Intel Corporation.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.

NB3N1200KMNTXG

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Clock Buffer 3.3V 100/133MHz Diff 1:12 HCSL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet