© Semiconductor Components Industries, LLC, 2016
June, 2016 − Rev. 2
1 Publication Order Number:
NCV7513B/D
NCV7513B
FLEXMOSt Hex Low-Side
MOSFET Pre-Driver
The NCV7513B programmable six channel low−side MOSFET
pre−driver is one of a family of FLEXMOS
TM
automotive grade
products for driving logic−level MOSFETs. The product is
controllable by a combination of serial SPI and parallel inputs. It
features programmable fault management modes and allows
power−limiting PWM operation with programmable refresh time.
The device offers 3.3 V/5.0 V compatible inputs and the serial output
driver can be powered from either 3.3 V or 5.0 V. Power−on reset
provides controlled powerup and two enable inputs allow all outputs
to be simultaneously disabled.
Each channel independently monitors its external MOSFET’s
drain voltage for fault conditions. Shorted load fault detection
thresholds are fully programmable using an externally programmed
reference voltage and a combination of four discrete internal ratio
values. The ratio values are SPI selectable and allow different
detection thresholds for each group of three output channels.
Fault information for each channel is 2−bit encoded by fault type
and is available through SPI communication. Fault recovery
operation for each channel is programmable and may be selected for
latch−off or automatic retry.
The FLEXMOS family of products offers application scalability
through choice of external MOSFETs.
Features
• 16−Bit SPI with Frame Error Detection
• 3.3 V/5.0 V Compatible Parallel and Serial Control Inputs
• 3.3 V/5.0 V Compatible Serial Output Driver
• Two Enable Inputs
• Open−Drain Fault and Status Flags
• Programmable
− Shorted Load Fault Detection Thresholds
− Fault Recovery Mode
− Fault Retry Timer
− Flag Masking
• Load Diagnostics with Latched Unique Fault Type Data
− Shorted Load
− Open Load
− Short to GND
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Benefits
• Scalable to Load by Choice of External MOSFET
LQFP32
FT SUFFIX
CASE 561AB
www.onsemi.com
MARKING
DIAGRAM
Device Package Shipping†
ORDERING INFORMATION
NCV7513BFTG LQFP
(Pb−Free)
250 Units/Tray
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
NCV7513B
AWLYYWWG
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
NCV7513BFTR2G LQFP
(Pb−Free)
2000 Tape & Ree