S650DC Series 1.8-Inch SAS NAND Flash
SSD
MTFDJAA400MBS, MTFDJAA800MBS
Features
• One endurance level: S650DC = 10 DWPD
• Micron
®
16nm MLC NAND Flash
• RoHS-compliant package
• SAS
– Interface = 12 Gb/s
– Speed = 3 Gb/s, 6 Gb/s, 12 Gb/s, and auto-speed
negotiation
– SAS-3 support
• SAM-5 compliant
• Enterprise sector size support = 512, 520, 524, 528,
4096, 4160, 4192, and 4224-byte
• Hot-plug capable
• 128-entry command queue depth
• Digitally signed firmware for SED and non-SED
• Secure erase via format unit
• Reliability
– MTTF: 2.5 million device hours
1
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): 1 × 10
17
bits
transferred
• Capacity
2
(unformatted): 400GB, 800GB
• Endurance: Total bytes written (TBW) over warranty
period
4
– S650DC (10 DWPD):
400GB – 7PB, 800GB – 14PB
• Electrical
– Supply voltage: 3.3 V
DC
(±5%) and 5 V
DC
(±5%)
• Mechanical
– 1.8-inch drive: 78.5mm × 54.0mm × 5.0mm
• Field-upgradeable firmware
• Power consumption: 9W (TYP) and 12W (MAX)
– Configurable through information exceptions
mode page
• Operating temperature
– 0°C to +50°C (MAX)
3
Notes:
1. Product achieves a mean time to failure
(MTTF) based on population statistics that
are not relevant to individual units.
2. 1GB = 1 billion bytes; formatted capacity is
less.
3. Based on ambient air temperature.
4. As defined in the product manual, warranty
is five years or device expiration as indica-
ted by the device life indicator, whichever
comes first.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
Preliminary
‡
S600DC Series 1.8-Inch SAS NAND Flash SSD
Features
PDF: 09005aef86470b9b
s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.
