Environmental Specifications
Table 31: Environmental Specifications – 1
Parameter/Condition Min Max Unit
Operating temperature
1
32/0 122/50 °F/°C
Non-operating temperature –40/–40 167/75
Rate of temperature change 36/20
Relative humidity (non-condensing) 5 95 %rh
Relative humidity (rate of change /hr) 20
Effective altitude (operating) –1000/304.8 10,000/3048 ft/M
Effective altitude (non-operating) –1000/304.8 40,000/12,192
Note:
1. Based on ambient air temperature
Table 32: Environmental Specifications – 2
Parameter Condition Max Unit
Operating shock (half sine wave) Gs 1000 g
Duration 0.5 ms
Interval 2 sec
Non-operating shock (half sine wave) Gs 1000 g
Duration 0.5 ms
Interval 2 sec
Preliminary
S600DC Series 1.8-Inch SAS NAND Flash SSD
Electrical Characteristics
PDF: 09005aef86470b9b
s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN
25
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Regulatory Compliance
Micron SSDs comply with the following:
RoHS
CE (Europe): EN55022, 2006 + A1:2007 and EN55024, 1998 + A1: 2001 + A2:2003
FCC: CFR Title 47, Part 15 Class A
UL (US): approval to UL-60950-1, 2nd Edition, IEC 60950-1:2005, 2nd Edition; Am
1:2009, EN 60950-1 (2006) + A11:2009+ A1:2010 + A12:2011
BSMI (Taiwan): approval to CNS 13438
C-TICK (Australia, New Zealand): approval to AS/NZS CISPR22
KCC RRL (Korea): approval to KCC-REM-MU2
W.E.E.E.: Compliance with EU WEEE directive 2002/96/EC. Additional obligations
may apply to customers who place these products in the markets where WEEE is en-
forced.
TUV (Germany): approval to IEC60950/EN60950
V
CCI
FCC Rules
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment.. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at one’s own expense.
Preliminary
S600DC Series 1.8-Inch SAS NAND Flash SSD
Regulatory Compliance
PDF: 09005aef86470b9b
s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN
26
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Package Dimensions
1.8-Inch Package – 5.0mm
Figure 4: 1.8-Inch Package – 5.0mm
2X 3.00 (A7)
MIN
2X 2.50 ±0.30
(A21 ±A22)
78.50 ±0.30
(A6 ±A22)
Top surface
1.35 (A14)
3.85 REF (A19)
2X 3.00 REF (A7)
5.00 REF (A1a)
Section A-A
0.40 (A15)
2X 3.30 ±0.35
(A8 ±A2)
5.00 ±0.35
(A1a ±A2)
2X 3.00 (A7)
MIN
2X 3.00 REF (A7)
0.35 (A17)
4.00 REF (A13)
35.00 REF (A10)
27.04 REF (A11)
0.20 (A12)
X Y
Connector protrusion
2X 0.50 (A18) MAX
Bottom surface
54.00 REF (A4)
54.00 ±0.20 (A4 ±A3)
0.30 (A16)
C of
L
C of
L
X
X
Z
Y
Y
Y
XB
A
A
A
A
C of
L
B
Preliminary
S600DC Series 1.8-Inch SAS NAND Flash SSD
Package Dimensions
PDF: 09005aef86470b9b
s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN
27
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.

MTFDJAA400MBS-1AN1ZABYY

Mfr. #:
Manufacturer:
Micron
Description:
SSD 400GB 1.8" MLC SATA III
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union