Table 18: SAS Command Set and Additional Supported Bits – SED and Non-SED (Continued)
Command
Op-Code
(Hex)
Sub-Command/
Functional Bit Description Supported
LOG SENSE (10) 4D – – Yes
0Fh Application client log page Yes
15h Background scan results log
page
Yes
01h Buffer over-run/under-run page No
37h Cache statistics page Yes
3Eh Factory log page Yes
2Fh Information exceptions log page Yes
0Bh Last n deferred errors or async
events page
No
07h Last n error events page No
06h Non-medium error page Yes
00h Page support list Yes
1Ah Power conditions transitions
page
Yes
18h Protocol-specific port log page Yes
03h Read error counter page Yes
04h Read reverse error counter page No
10h Self-test results page Yes
11h Solid state media log page Yes
0Eh Start-stop cycle counter page Yes
0Dh Temperature page Yes
38h Vendor unique page Yes
3Ch Vendor unique page Yes
05h Verify error counter page Yes
02h Write error counter page Yes
Preliminary
S600DC Series 1.8-Inch SAS NAND Flash SSD
Commands
PDF: 09005aef86470b9b
s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN
14
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.