MTFDJAA400MBS-1AN1ZABYY Datasheet MTFDJAA400MBS-1AN1ZABYY, MTFDJAA800MBS-1AN16ABYY, MTFDJAA800MBS-1AN1ZABYY | P7-P9

Table 9: Standard LBA Settings – 4224-Byte Sector Size

Capacity

Total LBA Max LBA User Available

Bytes

(Unformatted)Decimal Hexadecimal Decimal Hexadecimal

400GB 93,844,704 597F4E0 93,844,703 597F4DF 396,400,029,696

800GB 187,689,400 B2FE9B8 187,689,399 B2FE9B7 792,800,025,600

Physical Configuration

Dimensions and Weight

Form

factor Capacity (GB)

Height

(mm)

Width

(mm)

Length

(mm)

Weight

(grams)

1.8-inch 400/800 5.00 ±0.35 54.00 ±0.20 78.50 ±0.30 TBD

Dual Port Support

Micron's 600 Series SAS SSD drives have two independent ports, which can be connec-

ted in the same or different SCSI domains. Each drive port has a unique SAS address.

The two ports are capable of independent port clocking. For example, both ports can

run at 12 Gb/s, or the first port can run at 12 Gb/s while the second runs at 6 Gb/s. Sup-

ported link rates are 3.0, 6.0, or 12.0 Gb/s.

Subject to buffer availability, SSD drives support the following:

• Concurrent port transfers: Supports receiving COMMAND and TASK management

transfers on both ports simultaneously

• Full duplex transfers: Supports sending XFER_RDY, DATA, and RESPONSE transfers

while receiving frames on both ports

Preliminary

S600DC Series 1.8-Inch SAS NAND Flash SSD

Physical Configuration

PDF: 09005aef86470b9b

s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

Interface Connectors

The SAS signal segment interface cable has four transmission conductors and three

ground conductors for each channel. As shown in the figure below, the cable includes

two 7-pin signal segments (primary and secondary) and a 9-pin power segment ar-

ranged in a single row with a 1.27mm (0.050 inch) pitch.

SAS drives use the device connector for the following:

• DC power

• SAS interface (dual port)

• Activity LED (DAS)

Figure 3: SSD Interface Connections

A1 and A2

Secondary signal segment

Primary signal segment

Power segment

Preliminary

S600DC Series 1.8-Inch SAS NAND Flash SSD

Physical Configuration

PDF: 09005aef86470b9b

s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

Pin Assignments

Table 10: Primary SAS Signal Segment Pin Assignments

Signal Name Type Description

S1 GND Second mate to ground

S2 RX0+ Positive (RX0 from target); short pin to support hot plugging

S3 RX0– Negative (RX0 from target); short pin to support hot plugging

S4 GND Second mate to ground

S5 TX0– Negative (TX0 to target); short pin to support hot plugging

S6 TX0+ Positive (TX0 to target); short pin to support hot plugging

S7 GND Second mate to ground

Table 11: Secondary SAS Signal Segment Pin Assignments – Back Side

Signal Name Type Description

S8 GND Second mate to ground

S9 RX1+ Positive (RX1 from target); short pin to support hot plugging

S10 RX1– Negative (RX1 from target); short pin to support hot plugging

S11 GND Second mate to ground

S12 TX1– Negative (TX1 to target); short pin to support hot plugging

S13 TX1+ Positive (TX1 to target); short pin to support hot plugging

S14 GND Second mate to ground

Table 12: SAS Power Segment Pin Assignments

Signal Name Type Description

P1 V3.3 3.3V power; short pin to support hot plugging

P2 V3.3 3.3V power (charge)

P3 GND Ground

P4 GND Ground

P5 V5 5V power (charge)

P6 V5 5V power; short pin to support hot plugging

P7 Reserved Reserved; short pin to support hot plugging

P8 NC NC (reserved for manufacturing diagnostics); short pin to support hot plugging; no inter-

nal connection to drive.

P9 NC NC (reserved for manufacturing diagnostics); short pin to support hot plugging; no inter-

nal connection to drive.

Vendor Specific

A1* – Vendor specific; short pin to support hot plugging

A2* – Vendor specific; short pin to support hot plugging

Preliminary

S600DC Series 1.8-Inch SAS NAND Flash SSD

Physical Configuration

PDF: 09005aef86470b9b

s600dc_series_1_8_sas_ssd.pdf - Rev. F 3/16 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P24 P25-P27 P28-P29

MTFDJAA400MBS-1AN1ZABYY

Mfr. #:

Buy MTFDJAA400MBS-1AN1ZABYY

Manufacturer:

Micron

Description:

SSD 400GB 1.8" MLC SATA III

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MTFDJAA400MBS-1AN1ZABYY

MTFDJAA400MBS-1AN1ZABYY

Products related to this Datasheet