Revision history SPC563Mxx
44/48 Doc ID 13850 Rev 6
5 Revision history
Table 4. Revision history
Date Revision Description
30-Aug-2007 1 Initial release.
7-Nov-2007 2
Removed:
– - Section 5: LQFP144 pinout diagram including Figure 2: LQFP144
pinout
– - Section 6: LQFP144 pin description including Table 3: LQFP144 pin
description
– - Section 7: LFBGA208 ballout diagram including Figure 3: LFBGA208
ballout
Added
– - Section 5: Signal description on page 43 including Section 5.1:
Signal properties summary, Table 3: SPC563M60 signal properties,
Section 5.2: Detailed signal descriptions, Section 5.3: I/O
power/ground segmentation and Table 4: SPC563M60 power/ground
segmentation
– - Section 6: Device pin outs on page 69 including Section 6.1:
LQFP144 pinout, Figure 2: LQFP144 pinout, Section 6.2: LFBGA208
ballout diagram and Figure 3: LFBGA208 ballout diagram
Removed parameters D3 and E3 from Figure 4: LQFP144 (20 x 20 x
1.40 mm) package mechanical outline:
Removed minimum and maximum values for parameters D, D1, E and
E1 and removed parameters D3 and E3 from Table 6: LQFP144
package mechanical data on page 74:
Added note about LQFP144 package and JEDEC compliancy to Section
8: Package information on page 73
13-Mar-2009 3
Updated document to include information on all members of the
SPC563Mxx family.
Replaced references to the core (was “e200z3”, is “e200z335”) and
Nexus module (was “Nexus development interface (NDI)”, is “Nexus port
controller (NPC)”).
Changed the arrangement of V
STBY
, the standby RAM, and the voltage
regulator in the block diagram.
Revised the device-comparison table and feature list.
In the “Feature List” section, added “(for 100- and 144-pin packages)” to
the “Single power supply” operating parameter.
In the “Feature Details” section, replaced the CI/NMI text in the INTC
description with information on the NMI only.
Reformatted company-specific references.
Added a revision history.
Formatting, spelling, grammar, and layout corrections.
