R8C/3MQ Group 5. Electrical Characteristics
R01DS0044EJ0200 Rev.2.00 Page 27 of 47
Jun 29, 2012
5. Electrical Characteristics
Table 5.1 Absolute Maximum Ratings
Symbol Parameter Condition Rated Value Unit
VCC Digital supply voltage −0.3 to 3.8 V
VCCRF Analog supply voltage −0.3 to 3.8 V
V
I Input voltage
RESET
, MODE, P0_4, P1,
P3_0, P3_1, P3_3 to P3_5,
P3_7, P4_3 to P4_5
−0.3 to V
CC + 0.3 V
V
O Output voltage P0_4, P1, P3_0, P3_1, P3_3
to P3_5, P3_7, P4_3 to P4_5
−0.3 to VCC + 0.3 V
VRFIO RF I/O pins RFIOP, RFION −0.3 to 2.1 V
VTESTIO Test ports IFRXTP, IFRXTN −0.3 to 2.1 V
VANAIN 1.5 V analog supply
(input)
VREG1, VREG2, VREG3,
VREG4
−0.3 to 2.1 V
VANAOUT 1.5 V analog supply
(output)
VREGOUT1, VREGOUT2,
VREGOUT3
−0.3 to 2.1 V
VXINOUT Main clock I/O XIN, XOUT −0.3 to 2.1 V
P
d Power dissipation −20°C ≤ Topr ≤ 85°C300mW
T
opr Operating ambient
temperature
(1) During MCU operation
under the conditions other
than (2) and (3) below.
−20 to 85 °C
(2) During programming and
erasing of the flash
memory using a serial
programmer or parallel
programmer.
0 to 60
(3) During on-chip debugging
with the E8a emulator
connected
10 to 35
T
stg Storage temperature −65 to 150 °C