REV. 0
–36–
ADSP-2186M
The LQFP package pinout is shown in the table below. Pin names in bold text replace the plain text named functions when
Mode C = 1. A + sign separates two functions when either function can be active for either major I/O mode. Signals enclosed in
brackets [ ] are state bits latched from the value of the pin at the deassertion of RESET.
The multiplexed pins DT1/FO, TFS1/IRQ1, RFS1/IRQ0, and DR1/FI, are mode selectable by setting Bit 10 (SPORT1 configure)
of the System Control Register. If Bit 10 = 1, these pins have serial port functionality. If Bit 10 = 0, these pins are the external inter-
rupt and flag pins. This bit is set to 1 by default upon reset.
LQFP Package Pinout
Pin Pin Pin Pin
No. Pin Name No. Pin Name No. Pin Name No. Pin Name
1 A4/IAD3 26 IRQE + PF4 51 EBR 76 D16
2 A5/IAD4 27 IRQL0 + PF5 52 BR 77 D17
3 GND 28 GND 53 EBG 78 D18
4A6/IAD5 29 IRQL1 + PF6 54 BG 79 D19
5 A7/IAD6 30 IRQ2 + PF7 55 D0/IAD13 80 GND
6 A8/IAD7 31 DT0 56 D1/IAD14 81 D20
7 A9/IAD8 32 TFS0 57 D2/IAD15 82 D21
8 A10/IAD9 33 RFS0 58 D3/IACK 83 D22
9 A11/IAD10 34 DR0 59 V
DDINT
84 D23
10 A12/IAD11 35 SCLK0 60 GND 85 FL2
11 A13/IAD12 36 V
DDEXT
61 D4/IS 86 FL1
12 GND 37 DT1/FO 62 D5/IAL 87 FL0
13 CLKIN 38 TFS1/IRQ1 63 D6/IRD 88 PF3 [MODE D]
14 XTAL 39 RFS1/IRQ0 64 D7/IWR 89 PF2 [MODE C]
15 V
DDEXT
40 DR1/FI 65 D8 90 V
DDEXT
16 CLKOUT 41 GND 66 GND 91 PWD
17 GND 42 SCLK1 67 V
DDEXT
92 GND
18 V
DDINT
43 ERESET 68 D9 93 PF1 [MODE B]
19 WR 44 RESET 69 D10 94 PF0 [MODE A]
20 RD 45 EMS 70 D11 95 BGH
21 BMS 46 EE 71 GND 96 PWDACK
22 DMS 47 ECLK 72 D12 97 A0
23 PMS 48 ELOUT 73 D13 98 A1/IAD0
24 IOMS 49 ELIN 74 D14 99 A2/IAD1
25 CMS 50 EINT 75 D15 100 A3/IAD2
