Si4114G
22 Rev. 1.1
7. Package Outline: Si4114G-BM
Figure 12. 28-Pin Quad Flat No-lead Package (QFN)
Table 8. Package Dimensions
Controlling Dimension: mm
Symbol Millimeters
Min Nom Max
A 0.85 0.90
A1 0.00 0.01 0.05
b 0.18 0.23 0.30
D, E 5.00 BSC
D1, E1 4.75 BSC
D2 2.55 2.70 2.85
E2 2.55 2.70 2.85
N28
Nd 7
Ne 7
e 0.50 BSC
L 0.50 0.60 0.75
θ 12°
E1/2 E/2
E1 E
A
N
D1
D1/2
D/2
D
A1
A
b
N
e
L
(Nd–1) Xe
REF.
BOTTOM VIEW
TOP VIEW
θ
(Ne–1) Xe
REF.
1
2
3
1
2
3
bA1
e
C
L
CC
SECTION "C–C"
SCALE: NONE
Pin 1 ID
0.20 R
D2
E2
Si4114G
Rev. 1.1 23
DOCUMENT CHANGE LIST
Revision 0.5 to Revision 1.0
Table 5 on page 8
Combined Notes and 3 and 4
Revision 1.0 to Revision 1.1
Updated "6. Ordering Guide" on page 21.
Changed all package type references of MLP to
QFN.
Si4114G
24 Rev. 1.1
CONTACT INFORMATION
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, Texas 78701
Tel:1+ (512) 416-8500
Fax:1+ (512) 416-9669
Toll Free:1+ (877) 444-3032
Email: RFinfo@silabs.com
Internet: www.silabs.com
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brand names mentioned herein are trademarks or registered trademarks of their respective holders.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed fea-
tures or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no war-
ranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume
any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applica-
tions intended to support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a
situation where personal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended
or unauthorized application, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.

SI4114G-B-GM

Mfr. #:
Manufacturer:
Silicon Labs
Description:
RF Wireless Misc GSM Frequency Synthesizer for Direct Conversion, lead free Not recommended for new designs, Recommended replacement is multiple Si41xx-D-GM devices
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet