P400m 2.5-Inch SATA NAND Flash SSD
MTFDDAK100MAN-1S1AA, MTFDDAK200MAN-1S1AA,
MTFDDAK400MAN-1S1AA
Features
• Micron
®
25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5
• Enterprise sector size support
– 512-byte
• Hot-plug capable
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password
login support
• Security erase command set: fast and secure erase
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• 100GB performance (steady state)
1, 2
– Sequential 64KB read: 380 MB/s
– Sequential 64KB write: 200 MB/s
– Random 4KB read: 52,000 IOPS
– Random 4KB write: 21,000 IOPS
– READ latency: 0.57ms
– WRITE latency: 2ms
• 200GB performance (steady state)
1, 2
– Sequential 64KB read: 380 MB/s
– Sequential 64KB write: 310 MB/s
– Random 4KB read: 54,000 IOPS
– Random 4KB write: 26,000 IOPS
– READ latency: 0.51ms
– WRITE latency: 2ms
• 400GB performance (steady state)
1, 2
– Sequential 64KB read: 380 MB/s
– Sequential 64KB write: 310 MB/s
– Random 4KB read: 60,000 IOPS
– Random 4KB write: 26,000 IOPS
– READ latency: 0.51ms
– WRITE latency: 2ms
• Reliability
– Mean time to failure (MTTF): 2 million device
hours
3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 10
16
bits read
• Endurance: Total bytes written (TBW)
– 100GB: 1.75PB; 200GB: 3.50PB; 400GB: 7.00PB
• Capacity
4
(unformatted): 100GB, 200GB, 400GB
• Mechanical: 7.0mm height
– SATA connector: 5V ±10%
– 2.5-inch drive: 100.5mm x 69.85mm x 7.0mm
• Field-upgradeable firmware
• Power consumption: <7.5W (TYP)
• Operating temperature
– Commercial (0°C to 70°C)
5
Notes:
1. Typical I/O performance numbers as meas-
ured using Iometer with a queue depth of
32 and write cache disabled.
2. 4KB transfers used for READ/WRITE latency
values.
3. The product achieves a MTTF based on pop-
ulation statistics not relevant to individual
units.
4. 1GB = 1 billion bytes; formatted capacity is
less.
5. Drive case temperature.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
P400m 2.5-Inch NAND Flash SSD
Features
PDF: 09005aef84952553
p400m_2_5.pdf - Rev. H 11/13 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
