Logical Block Address Configuration
The drive is set to report the number of logical block addresses (LBA) that will ensure
sufficient storage space for the specified density. Standard LBA settings, based on the
IDEMA standard (LBA1-02), are shown below.
Table 1: Standard LBA Settings – 512-Byte Sector Size
Drive Size
Total LBA Max LBA
User Available
Bytes
Decimal Hexadecimal Decimal Hexadecimal (Unformatted)
100GB 195,371,568 BA52230 195,371,567 BA5222F 100,030,242,816
200GB 390,721,968 1749F1B0 390,721,967 1749F1AF 200,049,647,616
400GB 781,422,768 2E9390B0 781,422,767 2E9390AF 400,088,457,216
Physical Configuration
Table 2: 2.5-Inch Dimensions
Specification
Value
UnitNom Max
Height – 7.0 mm
Width 69.85 – mm
Length 100.50 – mm
P400m 2.5-Inch NAND Flash SSD
Logical Block Address Configuration
PDF: 09005aef84952553
p400m_2_5.pdf - Rev. H 11/13 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.