Table 5: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
206 – – – SCT command transport
15–12 X 0000b Vendor-specific
11–6 F 000000b Reserved
5 F 1b SCT command transport data tables are supported
4 F 1b SCT command transport features control is supported
3 F 0b SCT command transport error recovery control is supported
2 F 1b SCT command transport write same is supported
1 F 0b SCT command transport long sector access is supported
0 F 1b SCT command transport is supported
207 – ( )F 0000h 0000h Reserved for CE-ATA
209 – (O) – Alignment of logical blocks within a larger physical block
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–0 F 00000000000000b Logical sector offset within the first physical sector where
the first logical sector is placed
210 – (O)V 0000h 0000h Write-read-verify sector count mode 3 only
212 – (O)F 0000h 0000h Verify sector count mode 2 only
214 – (O) – NV cache capabilities
15–12 F 0000b NV cache feature set version
11–8 F 0000b NV cache power mode feature set version
7–5 F 000b Reserved
4 V 0b 1 = NV cache feature set is enabled
3–2 F 00b Reserved
1 V 0b 1 = NV cache power mode feature set is enabled
0 F 0b 1 = NV cache power mode feature set is supported
215 – (O)V 0000h NV cache size in logical blocks (LSW)
216 – (O)V 0000h NV cache size in logical blocks (MSW)
217 – (M)F 0001h Nominal media rotation rate (ATA8-ACS 1699-D revision 6)
– – – NV cache read transfer speed in MB/s (ATA8-ACS 1699-D re-
vision 3f)
218 – (O)V 0000h NV cache write transfer speed in MB/s
219 – – – NV cache options
15–8 F 00h Reserved
7–0 F 00h Device estimated time to spin-up in seconds
220 15–8 F 00h Reserved
7–0 V 00h Write-read-verify feature set current mode
221 – – 0000h Reserved
P400m 2.5-Inch NAND Flash SSD
Device ID
PDF: 09005aef84952553
p400m_2_5.pdf - Rev. H 11/13 EN
19
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.