Revision History
Rev. H – 11/13
• Updated descriptions for bits 1 and 2 for Word 119
Rev. G – 5/13
• Updated Compliance section
Rev. F – 4/13
• Updated Compliance section
Rev. E – 2/13
• Updated power consumption and operating shock numbers in Electrical Characteris-
tics section
Rev. D – 2/13
• Updated performance numbers in Features and Performance sections
Rev. C – 1/13
• Updated READ latency
• Updated default value of word 119, bit 1 in Identify Device table
• Updated default value of word 212 in Identify Device table
• Updated note 1 of Identity Device table
• Removed unavailable commands from the Commands section
• Updated 200GB in Drive Lifetime table
• Updated Compliance section
Rev. B – 2/12
• Updated Features
• Added specifications throughout for 200GB and 400GB densities
• Updated Thermocouple Placement Guidelines figure
Rev. A – 1/12
• Initial release
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900
www.micron.com/productsupport Customer Comment Line: 800-932-4992
Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.
Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.
P400m 2.5-Inch NAND Flash SSD
Revision History
PDF: 09005aef84952553
p400m_2_5.pdf - Rev. H 11/13 EN
29
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
