2003 Oct 01 64
Philips Semiconductors Product specification
CD audio decoder, digital servo and filterless
DAC with integrated pre-amp and laser control
SAA7826
Table 46 brake_dist_max parameter: maximum sledge
distance allowed in fast actuator steered mode;
RAM address 21H
Table 47 sledge_Umax parameter: voltage on sledge
during long jump
Table 48 sledge_level parameter: voltage on sledge
when steered
Table 49 jumpwatchtime parameter: radial jump
watchdog readout time difference; RAM
address 57H
Table 50 playwatchtime parameter: radial play watchdog
maximum time-out; RAM address 54H
Table 51 radcontrol parameter: automatic radial servo
switch-off control; RAM address 59H
brake_dist_max value
(decimal)
Maximum sledge
distance allowed in fast
actuator steered mode,
number of tracks
0...127 not allowed
11×16
22×16
.... ....
ii×16
.... ....
127 127 × 16
128 128 × 16
sledge_Umax (decimal) voltage on sledge
127 255/256 × V
DD
i (i + 128)/256 × V
DD
0 0.5 × V
DD
1 (128 1)/256 × V
DD
i(i + 128)/256 × V
DD
128 0
sledge_level (decimal) voltage on sledge
127 127/256 × V
DD
i i/256 × V
DD
00
11/256 × V
DD
i i/256 × V
DD
128 128/256 × V
DD
jumpwatchtime
Radial jump watchdog
readout time difference
ms
80H to FFH none
0H 0
1H 0.25
ii×0.25
7FH 32
playwatchtime
Radial play watchdog
maximum time-out ms
80H 0
81H 0.5
82H 1
i(i 80H) × 0.5
00H 64
j (j + 80H) × 0.5
7fH 128
radcontrol Hex
Automatic
radial servo
switch-off
control
0000 0000 00 radial servo not
influenced by
watchdog
0100 0000 40 switch-off radial
servo on jump
error; no action
on play error
0010 0000 20 switch-off radial
servo on play
error; no action
on jump error
0110 0000 60 switch-off radial
servo on play or
jump error
2003 Oct 01 65
Philips Semiconductors Product specification
CD audio decoder, digital servo and filterless
DAC with integrated pre-amp and laser control
SAA7826
Table 52 hold_mult parameter: velocity proportional part
during long jump, sledge gain in steered sledge
mode; RAM address 49H
Table 53 speed_threshold parameter: maximum sledge
speed allowed in fast actuator steered mode;
RAM address 48H
Table 54 sledge_long_brake parameter: maximum
sledge distance allowed in sledge steered
mode; RAM address 58H
hold_mult
Hex
Velocity
proportional
part during long
jump K
p
vel_prop1
(binary)
0000 xxxx 0x 0
1000 xxxx 8x 0.015625
0100 xxxx 4x 0.031250
1100 xxxx Cx 0.046875
0010 xxxx 2x 0.062500
1010 xxxx Ax 0.078125
0110 xxxx 6x 0.093750
1110 xxxx Ex 0.109375
0001 xxxx 1x 0.125000
1001 xxxx 9x 0.140625
0101 xxxx 5x 0.156250
1101 xxxx Dx 0.171875
0011 xxxx 3x 0.187500
1011 xxxx Bx 0.203125
0111 xxxx 7x 0.218750
1111 xxxx Fx 0.234375
vel_prop2 Sledge gain in
steered mode
G
S
xxxx x000 x0 2
xxxx x001 x1 3
xxxx x010 x2 4
xxxx x011 x3 6
xxxx x100 x4 8
xxxx x101 x5 12
xxxx x110 x6 16
xxxx x111 x7 24
speed_threshold value
(decimal)
Maximum sledge speed
allowed in fast actuator
steered mode, number of
tracks (x 1000 tracks/sec)
0...127 not allowed
11
22
3...127 3...127
128 128
64 reset value
sledge_long_brake
(decimal)
Maximum sledge
distance allowed in
sledge steered mode,
number of tracks
1...128 test always true
11×128
22×128
3...62 3 × 128...62 × 128
63 63 × 128
1 reset value
2003 Oct 01 66
Philips Semiconductors Product specification
CD audio decoder, digital servo and filterless
DAC with integrated pre-amp and laser control
SAA7826
Table 55 defect_parm parameter: defect detector control
Table 56 interrupt_mask parameter: mask to enable
interrupt in interrupt status register; RAM
address 53H
Table 57 time_parameter: timer interrupt values
Note
1. The time_parameter values are also used for
focus_start_time, motor_start_time1,
motor_start_time2, radial_init_time and brake_time.
Table 58 phase_shift parameter: focus/radial AGC
detection phase shift; RAM address 67H
Note
1. The value a is the value programmed in Table 60 as
the 6 LSBs of osc_inc.
defect_parm Fast filter bandwidth
xxxx xx00 3500 Hz
xxxx xx01 7000 Hz
xxxx xx10 14000 Hz
xxxx xx11 reserved for future use
defect_parm Slow filter time
constant
Alpha value
xxxx 10xx 16 ms 0.00006
xxxx 11xx 8 ms 0.00012
xxxx 00xx 4 ms 0.00024
xxxx 01xx 2 ms 0.00048
defect_parm
Coefficient β value
xx00 xxxx 0.25
xx01 xxxx 0.125
xx10 xxxx 0.0625
xx11 xxxx reserved for future use
defect_parm Defect detector maximum ON time
00xx xxxx 1.0 ms
01xx xxxx 1.5 ms
10xx xxxx 2.0 ms
11xx xxxx 2.5 ms
interrupt_mask Interrupt enabled
0000 0000 no interrupt
xxxx xxx1 focus lost
xxxx xx1x subcode ready
xxxx x1xx subcode absolute seconds
changed
xxxx 1xxx subcode discontinuity
xxx1 xxxx radial error
xx1x xxxx autosequencer state
changes
x1xx xxxx autosequencer error
time_parameter value
(decimal)
(1)
Timer interrupt values
wait time (ms)
129 i 143 4.26 × (i 128)
144 i 159 68.2 + 4.57 × (i 144)
160 i 175 141.4 + 4.92 × (i 160)
176 i 191 224.1 + 5.33 × (i 176
192 i 207 305.4 + 5.82 × (i 192
208 i 223 398.5 + 6.40 × (i 208)
224 i 239 500.8 + 7.11 × (i 224
2402 i 55 614.6 + 8.00 × (i 240)
0 i 15 742.6 + 9.11 × i
16 i 31 888.9 + 10.6 × (i 16)
32 i 47 1059 + 12.8 × (i 32)
48 i 63 1263 + 16.0 × (i 48)
64 i 79 1519 + 21.2 × (i 64)
80 i 95 1860 + 32.0 × (i 80)
96 i 111 2372 + 64.0 × (i 96)
111 3398.0
112...127 infinite
phase_shift
(decimal)
Focus/radial AGC detection phase
shift
(µs) (deg)
00 0
1×a
(1)
60.47 180 × (a/128)
2 × a 120.94 180 × (2 × a/128)
i × ai×60.47 180 × (i × a/128)
128 180
1 × a 60.47 180 × (a/128)
2 × a 120.94 180 × (2 × a/128)
i × a i × 60.47 180 × (i × a/128)
128 180

SAA7826HL/M1A,557

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
IC DIGITAL/CD DAC DECODER 80LQFP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet