AXL F UTH4 1H
8672_en_02 PHOENIX CONTACT 3
Description Type Order No. Pcs. / Pkt.
AxiolineF temperature module, 4inputs for connection of thermocouple
sensors (including bus base module and connectors)
AXL F UTH4 1H 2688598 1
Accessories Type Order No. Pcs. / Pkt.
AxiolineF bus base module for housing type H (Replacement item) AXL F BS H 2700992 5
Axioline shield connection set (contains 2 busbar holders and 2 SK 5 shield
connection clamps)
AXL SHIELD SET 2700518 1
Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, un-
printed, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or
CMS-P1-PLOTTER (Marking)
ZB 20,3 AXL UNPRINTED 0829579 25
Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual
labeling with M-PEN 0,8, X-PEN, or CMS-P1-PLOTTER (Marking)
ZBF 10/5,8 AXL UNPRINTED 0829580 50
Thermoelectric voltage terminal block, cross section: 0.2 - 2.5 mm², width:
10.4 mm, color: gray
MTKD-CU/CUNI 3100059 50
Thermoelectric voltage terminal block, cross section: 0.2 - 2.5 mm², width:
10.4 mm, color: gray
MTKD-FE/CUNI 3100046 50
Thermoelectric voltage terminal block, cross section: 0.2 - 2.5 mm², width:
10.4 mm, color: gray
MTKD-NICR/CUNI 3100075 50
Thermoelectric voltage terminal block, cross section: 0.2 - 2.5 mm², width:
10.4 mm, color: gray
MTKD-NICR/NI 3100062 50
Thermoelectric voltage terminal block, cross section: 0.2 - 2.5 mm², width:
10.4 mm, color: gray
MTKD-E-CU/A-CU 3100091 50
Thermoelectric voltage terminal block, cross section: 0.2 - 2.5 mm², width:
10.4 mm, color: gray
MTKD-S-CU/E-CU 3100101 50
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK
ROLL, THERMOMARK X, THERMOMARK S1.1, Mounting type:
snapped into marker carrier, Lettering field: 35 x 46 mm (Marking)
EMT (35X46)R 0801604 1
Documentation Type Order No. Pcs. / Pkt.
User manual, English, AxiolineF: System and installation UM EN AXL F SYS INST - -
User manual, English, Axioline F: Diagnostic registers, and error messages UM EN AXL F SYS DIAG - -