OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SL811HST-AXC

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39
SL811HS
Document Number: 38-08008 Rev. *H Page 37 of 39
Document History Page
Document Title: SL811HS, Embedded USB Host/Slave Controller
Document Number: 38-08008
Revision ECN
Submission
Date
Orig. of
Change
Description of Change
** 110850 12/14/01 BHA Converted to Cypress format from ScanLogic
*A 112687 03/22/02 MUL 1) Changed power supply voltage to 4.0 V in section 7.1
2) Changed value of twdsu in section 7.6.2
3) Changed max. power supply voltage to 3.45 V in section 7.2
4) Changed accuracy of adjustment in section 7.2
5) Changed bits 0 and 1 to reserved in section 5.3.8
6) Changed bit 2 to reserved in section 5.3.5 and 5.3.7
7) Changed bit 2 to reserved in section 5.3.1
8) Changed definition of bit 6 in section 5.3.5 & 5.3.7
9) Added section 5.1, Register Values on Power-up and Reset
10) Changed bit description notes in section 5.3.7
11) Changed note about series termination resistors in section 7.5
12) Changed example in section 5.3.9
13) Changed J-K Programming States table in section 5.3.2
14) Added and removed comments for low-power modes in section 5.3.4
15) Removed sections specific to slave operation and SL11H
16) Removed duplicate tables
17) General formatting changes to section headings
18) Fixed all part number references
19) Added comments to section 7.5 and new definitions to section 2.0
*B 381894 See ECN VCS Went from single column to 2-column format. Combined information from
SL811HS (38-08008) and SL811S/T (83-08009)
*C 464641 See ECN ARI Added lead free part numbers to new section Ordering Information and
corrected references made to these parts. Corrected grammar. Added
compliance statement in section USB Host Transceiver Characteristics.
*D 749518 See ECN ARI Implemented the new template. Changed Figure 4. Labels on pins 2 and 3 were
swapped; this has been corrected.
Combined the 48-pin TQFP AXC Pin Assignment and Definition table with the
28-pin PLCC Pin Assignment and Definition table. Removed all instances of
SL811HST-AC. Corrected the variables. Removed references to the obsolete
SL11H.
*E 2914091 04/15/2010 VRD Removed inactive parts from Ordering Information.
Updated Packaging Information.
*F 3202147 03/22/11 ODC Template and style updates.
Added ordering code definitions, acroyms and units of measure.
Updated table titles and references.
Removed all references to 28-pin PLCC Package information as the package
is no longer offered.
Removed figure “Package Markings (28-pin PLCC)” on page 21 as it refers the
PLCC package.
Removed figure “48-Pin TQFP Mechanical Dimensions” as this is a duplicate
of the Package diagram later in the spec on page 31.
SL811HS
Document Number: 38-08008 Rev. *H Page 38 of 39
*G 3999512 07/26/2013 PRVE Added Errata footnote (Note 1, 2, 3, 4, 6, 7).
Updated Functional Overview:
Updated Data Port, Microprocessor Interface:
Added Note 1 and referred the same note in “SL811HS”.
Added Note 2 and referred the same note in “DMA bidirectional interface in
slave mode”.
Updated Buffer Memory:
Updated Auto Address Increment Mode [3]
Added Note 3 and referred the same note in the heading.
Updated PLL Clock Generator:
Added Note 4 and referred the same note in “12 MHz”.
Updated USB Transceiver:
Added Note 6 and referred the same note in “full speed”.
Added Note 7 and referred the same note in “low speed”.
Added Errata.
Updated in new template.
*H 4346004 04/14/2014 PRVE Updated Package Diagram:
spec 51-85135 – Changed revision from *B to *C.
Completing Sunset Review.
Document History Page (continued)
Document Title: SL811HS, Embedded USB Host/Slave Controller
Document Number: 38-08008
Revision ECN
Submission
Date
Orig. of
Change
Description of Change
Document Number: 38-08008 Rev. *H Revised April 14, 2014 Page 39 of 39
All products and company names mentioned in this document may be the trademarks of their respective holders.
SL811HS
© Cypress Semiconductor Corporation, 2001-2014. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of
any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for
medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as
critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems
application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office
closest to you, visit us at Cypress Locations.
Products
Automotive cypress.com/go/automotive
Clocks & Buffers cypress.com/go/clocks
Interface cypress.com/go/interface
Lighting & Power Control cypress.com/go/powerpsoc
cypress.com/go/plc
Memory cypress.com/go/memory
PSoC cypress.com/go/psoc
Touch Sensing cypress.com/go/touch
USB Controllers cypress.com/go/USB
Wireless/RF cypress.com/go/wireless
PSoC
®
Solutions
psoc.cypress.com/solutions
PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP
Cypress Developer Community
Community | Forums | Blogs | Video | Training
Technical Support
cypress.com/go/support
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39

SL811HST-AXC

Mfr. #:
Buy SL811HST-AXC
Manufacturer:
Cypress Semiconductor
Description:
USB Interface IC 256B HOST COM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet