1. General description
The TJA1083G FlexRay node transceiver is compliant with the FlexRay Electrical
Physical Layer specification ISO 17458-4:2013 (see Ref. 1
and Ref. 2). It is primarily
intended for communication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and
provides an advanced interface between the protocol controller and the physical bus in a
FlexRay network. The TJA1083G offers an optimized solution for Electronic Control Unit
(ECU) applications that do not need enhanced power management and are typically
switched by the ignition or activated by a dedicated wake-up line.
The TJA1083G provides a differential transmit capability to the network and a differential
receive capability to the FlexRay controller. It offers excellent ElectroMagnetic
Compatibility (EMC) performance as well as high ElectroStatic Discharge (ESD)
protection.
The TJA1083G actively monitors system performance using dedicated error and status
information (readable via SPI), as well as internal voltage and temperature monitoring.
The TJA1083G is fully functionally and pin compatible with the TJA1083 (see Ref. 3
).
2. Features and benefits
2.1 Optimized for time triggered communication systems
Compliant with ISO 17458-4:2013 (see Ref. 2)
Automotive product qualification in accordance with AEC-Q100
Data transfer rates from 2.5 Mbit/s to 10 Mbit/s
Supports 60 ns minimum bit time at 400 mV differential input voltage
Very low ElectroMagnetic Emission (EME) to support unshielded cable, meeting the
latest industry standards
Differential receiver with high common-mode range for excellent ElectroMagnetic
Immunity (EMI), meeting the latest industry standards
Auto I/O level adaptation to host controller supply voltage V
IO
Can be used in 14 V, 24 V and 48 V powered systems
Instant transmitter shut-down interface (BGE pin)
2.2 Low-power management
Very low current consumption in Standby mode
Remote wake-up via a wake-up pattern or dedicated FlexRay data frames on the bus
lines
TJA1083G
FlexRay node transceiver
Rev. 1 — 18 January 2018 Product data sheet
TJA1083G All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
Product data sheet Rev. 1 — 18 January 2018 2 of 41
NXP Semiconductors
TJA1083G
FlexRay node transceiver
2.3 Diagnosis and robustness
Enhanced supply voltage monitoring for V
CC
and V
IO
Two error diagnosis modes:
Status register readout via the Serial Peripheral Interface (SPI)
Simple error indication via pin ERRN
Overtemperature detection
Short-circuit detection on bus lines
Power-on flag
Clamping diagnosis for pins TXEN and BGE
Bus pins protected against 6 kV ESD pulses according to IEC61000-4-2 and 8 kV
according to HBM
Bus pins protected against transients in automotive environment (according to
ISO 7637 class C)
Bus pins short-circuit proof to battery voltage (14 V, 24 V and 48 V) and ground
Maximum differential voltage between pins BP or BM and any other pin of 60 V
Bus lines remain passive when the transceiver is not powered
No reverse currents from the digital input pins to V
IO
or V
CC
when the transceiver is not
powered
2.4 Functional classes according to FlexRay Electrical Physical Layer
specification V3.0.1
Bus driver - bus guardian control interface
Bus driver - logic level adaptation
Bus driver - remote wake-up
3. Ordering information
Table 1. Ordering information
Type number Package
Name Description Version
TJA1083GTT TSSOP14 plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
TJA1083G All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
Product data sheet Rev. 1 — 18 January 2018 3 of 41
NXP Semiconductors
TJA1083G
FlexRay node transceiver
4. Block diagram
Fig 1. Block diagram
9
&&
81'(592/7$*(
'(7(&7,21
9
,2
81'(592/7$*(
'(7(&7,21
7;(17,0(287
,2
,2
67$7(
0$&+,1(
29(5
7(03(5$785(
'(7(&7,21
75$160,77(5
,2
$&7,9,7<
'(7(&7,21
%86(5525
08;


7;'
7;(1
9
,2
9
&&
63,
6'2
6&61
6&/.
5;'

*1'

,2
,2
,2
%*(
67%1
(551

%3
%0
,2
/2:32:(5
5(&(,9(5
1250$/
5(&(,9(5
DDD
,2
,2
,2
7-$*

TJA1083GTT/0Z

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
Interface - Specialized TJA1083GTT/TSSOP14//0/REEL 13 Q1 NDP SSB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet