Si5010
Rev. 1.4 19
DOCUMENT CHANGE LIST
Revision 1.0 to Revision 1.1
Added "7. Top Mark" on page 16.
Updated “8. Package Outline: Si5010-BM” on page
17.
Added "9. 4x4 mm 20L QFN Recommended PCB
Layout" on page 18.
Revision 1.1 to Revision 1.2
Made minor note corrections to "9. 4x4 mm 20L QFN
Recommended PCB Layout" on page 18.
Revision 1.2 to Revision 1.3
Global change: MLP to QFN.
Updated "6. Ordering Guide" on page 16.
Updated "7. Top Mark" on page 16.
Updated "8. Package Outline" on page 17.
Updated "9. 4x4 mm 20L QFN Recommended PCB
Layout" on page 18.
Revision 1.3 to Revision 1.4
Changed Minimum Output Clock Rate to 150 MHz in
Table 3 on page 7.
Added "7. Top Mark" on page 16.
Updated "6. Ordering Guide" on page 16.
Updated "8. Package Outline" on page 17.
Si5010
20 Rev. 1.4
CONTACT INFORMATION
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 7801
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Email: HighSpeed@silabs.com
Internet: www.silabs.com
Silicon Laboratories, Silicon Labs, and DSPLL are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features
or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-
resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-
plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.

SI5010-B-GMR

Mfr. #:
Manufacturer:
Silicon Labs
Description:
IC CLOCK/DATA RECOVERY LP 20-QFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet