GS1532 Data Sheet
21498 - 8 February 2007 6 of 51
1.2 Pin Descriptions
Table 1-1: Pin Descriptions
Pin
Number
Name Timing Type Description
1 CP_VDD – Power Power supply connection for the charge pump. Connect to +3.3V DC
analog.
2 PD_GND – Power Ground connection for the phase detector. Connect to analog GND.
3 PD_VDD – Power Power supply connection for the phase detector. Connect to +1.8V DC
analog.
4, 6-8, 10,
14-17, 31,
65, 66, 70,
71
NC – – No connect.
5 RSV – – Reserved. Connect to Analog GND.
9 DVB_ASI Non
Synchronous
Input CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
When set HIGH in conjunction with SD/HD
= HIGH and SMPTE_BYPASS
= LOW, the device will be configured to operate in DVB-ASI mode.
When set LOW, the device will not support the encoding of received
DVB-ASI data.
11 SD/HD
Non
Synchronous
Input CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
When set LOW, the device will be configured to transmit signal rates of
1.485Gb/s or 1.485/1.001Gb/s only.
When set HIGH, the device will be configured to transmit signal rates of
270Mb/s only.
12 20bit/10bit
Non
Synchronous
Input CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
Used to select the input data bus width in SMPTE or Data-Through
modes. This signal is ignored in DVB-ASI mode.
When set HIGH, the parallel input will be 20-bit demultiplexed data.
When set LOW, the parallel input will be 10-bit multiplexed data.