P89LPC9102_9103_9107_3 © NXP B.V. 2007. All rights reserved.
Product data sheet Rev. 03 — 10 July 2007 47 of 61
NXP Semiconductors
P89LPC9102/9103/9107
8-bit microcontrollers with two-clock accelerated 80C51 core
10. Limiting values
[1] The following applies to Table 11 “Limiting values”:
a) Stresses above those listed may cause permanent damage to the device. This is a stress rating only and functional operation of the
device at these or any conditions other than those described in Table 12 “Static characteristics” and Table 13 “Dynamic
characteristics (12 MHz)” section of this specification are not implied.
b) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
c) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V
SS
unless
otherwise noted.
Table 11. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Symbol Parameter Conditions Min Max Unit
T
amb(bias)
bias ambient temperature −55 +125 °C
T
stg
storage temperature −65 +150 °C
I
OH(I/O)
HIGH-level output current per
input/output pin
-8mA
I
OL(I/O)
LOW-level output current per
input/output pin
-20mA
I
I/Otot(max)
maximum total input/output current - 120 mA
V
n
voltage on any other pin except V
SS
, with respect to
V
DD
−0.5 +5.5 V
P
tot(pack)
total power dissipation per package based on package heat
transfer, not device power
consumption
- 1.5 W
