1. General description
The SC16C852V is a 1.8 V, low power dual channel Universal Asynchronous Receiver
and Transmitter (UART) used for serial data communications. Its principal function is to
convert parallel data into serial data and vice versa. The UART can handle serial data
rates up to 5 Mbit/s. SC16C852V can be programmed to operate in extended mode where
additional advanced UART features are available (see Section 6.2
). The SC16C852V
family UART provides enhanced UART functions with 128-byte FIFOs, modem control
interface, DMA mode data transfer, and IrDA encoder/decoder. On-board status registers
provide the user with error indications and operational status. System interrupts and
modem control features may be tailored by software to meet specific user requirements.
An internal loopback capability allows on-board diagnostics. Independent programmable
baud rate generators are provided to select transmit and receive baud rates.
The SC16C852V with Intel XScale processor VLIO interface operates at 1.8 V and is
available in HVQFN48 and TFBGA36 packages.
2. Features and benefits
Dual channel high performance UART
1.8 V operation
Advanced packages: HVQFN48 and TFBGA36
Up to 5 Mbit/s data rate at 1.8 V
128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU
128-byte receive FIFO with error flags to reduce the bandwidth requirement of the
external CPU
128 programmable Receive and Transmit FIFO interrupt trigger levels
128 Receive and Transmit FIFO reporting levels (level counters)
Automatic software (Xon/Xoff) and hardware (RTS
/CTS or DTR/DSR) flow control
Programmable Xon/Xoff characters
128 programmable hardware and software trigger levels
Automatic 9-bit mode (RS-485) address detection
Automatic RS-485 driver turn-around with programmable delay
Dual channel concurrent write
UART software reset
High resolution clock prescaler, from 0 to 15 with granularity of
1
⁄
16
to allow
non-standard UART clock to be used
Industrial temperature range (−40 °C to +85 °C)
Software compatible with industry standard SC16C652B
SC16C852V
1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs,
infrared (IrDA) and XScale VLIO bus interface
Rev. 5 — 21 January 2011 Product data sheet