2015-2016 Microchip Technology Inc. DS20005386B-page 1
PAC1710/20
Features
Single and Dual High-Side Current Sensor
- Current measurement is integrated over 2.5 ms
to 2.6 seconds with up to 11-bit resolution
- 1% current measurement accuracy in
positive range
- Measures V
SOURCE
voltages
•Calculates Power
•V
SOURCE
Voltage Range 0V to 40V
Bidirectional Current Sensing
Auto-Zero Input Offset Voltage
Digital Averaging
- Adjustable sampling time and resolution
5 µA Typical Standby Current
Programmable Sense Voltage Range
- ±10 mV, ±20 mV, ±40 mV, and ±80 mV
Power Supply Range 3.0V to 5.5V
Wide Temperature Operating Range: -40°C to
+85°C
•ALERT
Output for Voltage and Current out of
Limit Transients Between Sampling Interval
SMBus 2.0 Communications Interface
- Block Read and Block Write
- Address selectable by resistor decode
Sample Time Configurable from 2.5 ms to 320 ms
- With averaging effective sampling times up to
2.6 seconds
10-Lead 3 x 3 mm VDFN package
Applications
Notebook and Desktop Computers
Industrial
Power Management Systems
Embedded Applications
•Servers
Description
The PAC1710/20 are single and dual high-side
bidirectional current sensing monitors with precision
voltage measurement capabilities. Each sensor
measures the voltage developed across an external
sense resistor to represent the high-side current of a
battery or voltage regulator. The PAC1710/20 also
measures the SENSE+ pin voltage and calculates
average power over the integration period. The
PAC1710/20 can be programmed to assert the ALERT
pin when high and low limits are exceeded for Current
Sense and Bus Voltage.
The PAC1710/20 device is good for measuring
dynamic power. The long integration time allows for
extending system polling cycles without losing any
power consumption information. In addition the alert
ensures that transient events are captured between the
polling cycles.
Available in a RoHS compliant 3 x 3 mm 10-pin VDFN
package.
Package Types
SENSE2+
SENSE1-
SENSE2-
SMCLK
SMDATA
1
2
3
4
10
9
8
7
ALERT
V
DD
SENSE1+
EP
11
65
ADDR_SEL
GND
PAC1710/20
3x3 VDFN*
*Includes Exposed Thermal Pad (EP), see Tabl e 3 - 1
†PAC1720 only.
Single and Dual High-Side Current-Sense Monitor with
Power Calculation
PAC1710/20
DS20005386B-page 2 2015-2016 Microchip Technology Inc.
Device Block Diagram
SMBus
Interface
SMCLK
SMDATA
ADDR_SEL
SENSE2+
SENSE2-
Voltage
Registers
Configuration
Current Registers
Current Limits
Voltage Limits
ALERT
Power Register
Current
Measurement
Voltage
Measurement
Power
Management
V
DD
GND
Configuration
Current
Measurement
Voltage
Measurement
SENSE1+
SENSE1-
Analog
MUX
PAC1720 only
2015-2016 Microchip Technology Inc. DS20005386B-page 3
PAC1710/20
1.0 ELECTRICAL CHARACTERISTICS
1.1 Electrical Specifications
Absolute Maximum Ratings
(†)
V
DD
pin............................................................................................................................................................-0.3 to 6.0V
Voltage on SENSE- and SENSE+ pins.............................................................................................................-42 to 42V
Voltage on any other pin to GND ..................................................................................................-GND-0.3 to V
DD
+0.3V
Voltage between Sense pins (|(SENSE+
SENSE-)|)................................................................................................40V
Input current to any pin except V
DD
......................................................................................................................+10 mA
Output short-circuit current..............................................................................................................................Continuous
Package Power Dissipation (Note) ............................................................................................ 0.5W up to T
A
= 85°C/W
Junction to Ambient (
J-A
) .....................................................................................................................................78°C/W
Operating Ambient Temperature Range ......................................................................................................... -40 to 85°C
Storage Temperature Range......................................................................................................................... -55 to 150°C
ESD Rating
SMCLK, SMDATA, and ALERT pins HBM.....................................................................................8000V
SD Rating
all other pins HBM............................................................................................................................2000V
† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at those or any other conditions above those indicated
in the operation listings of this specification is not implied. Exposure above maximum rating conditions for extended peri-
ods may affect device reliability.
Note: The Package Power Dissipation specification assumes a recommended thermal via design consisting of a
2 x 3 matrix of 0.3 mm (12 mil) vias at 0.9 mm pitch connected to the ground plane with a 1.6 mm x 2.3 mm
thermal landing.

PAC1720-1-AIA-TR

Mfr. #:
Manufacturer:
Microchip Technology
Description:
Current & Power Monitors & Regulators Single I2C/SMBus Current Sensor
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet