1. General description
The SC16C654B/654DB is a Quad Universal Asynchronous Receiver and Transmitter
(QUART) used for serial data communications. Its principal function is to convert parallel
data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s.
It comes with an Intel or Motorola interface.
The SC16C654B/654DB is pin compatible with the ST16C654 and TL16C754 and it will
power-up to be functionally equivalent to the 16C454. Programming of control registers
enables the added features of the SC16C654B/654DB. Some of these added features are
the 64-byte receive and transmit FIFOs, automatic hardware or software flow control and
infrared encoding/decoding. The selectable auto-flow control feature significantly reduces
software overload and increases system efficiency while in FIFO mode by automatically
controlling serial data flow using RTS output and CTS input signals. The
SC16C654B/654DB also provides DMA mode data transfers through FIFO trigger levels
and the TXRDY and RXRDY signals. (TXRDY and RXRDY signals are not available in the
HVQFN48 package.) On-board status registers provide the user with error indications,
operational status, and modem interface control. System interrupts may be tailored to
meet user requirements. An internal loop-back capability allows on-board diagnostics.
The SC16C654B/654DB operates at 5 V, 3.3 V and 2.5 V, and the industrial temperature
range, and is available in plastic PLCC68, LQFP64, HVQFN48 and LFBGA64 packages.
On the HVQFN48 package, only channel C has all the modem pins. Channel A and
channel B have only RTS and CTS pins, and channel D does not have any modem pin.
2. Features
4 channel UART
5 V, 3.3 V and 2.5 V operation
Industrial temperature range (40 °C to +85 °C)
SC16C654B is pin and software compatible with the industry-standard
ST16C454/554, ST16C654, ST68C454/554, TL16C554
SC16C654DB is pin and software compatible with ST16C654D, and software
compatible with ST16C454/554, ST68C454/554, TL16C554
Up to 5 Mbit/s data rate at 5 V and 3.3 V and 3 Mbit/s at 2.5 V
5 V tolerant inputs
64-byte transmit FIFO
64-byte receive FIFO with error flags
Automatic software (Xon/Xoff)/hardware (RTS/CTS) flow control
Programmable Xon/Xoff characters
SC16C654B/654DB
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte
FIFOs and infrared (IrDA) encoder/decoder
Rev. 02 — 20 June 2005 Product data sheet
9397 750 14965 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 02 — 20 June 2005 2 of 58
Philips Semiconductors
SC16C654B/654DB
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
Software selectable baud rate generator
Four selectable Receive and Transmit FIFO interrupt trigger levels
Standard modem interface or infrared (IrDA) encoder/decoder interface
Sleep mode
Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun Break)
Transmit, Receive, Line Status, and Data Set interrupts independently controlled
Fully programmable character formatting:
5, 6, 7, or 8-bit characters
Even, Odd, or No Parity formats
1, 1
1
2
, or 2-stop bit
Baud generation (DC to 5 Mbit/s)
False start-bit detection
Complete status reporting capabilities
3-state output TTL drive capabilities for bi-directional data bus and control bus
Line break generation and detection
Internal diagnostic capabilities:
Loop-back controls for communications link fault isolation
Prioritized interrupt system controls
Modem control functions (CTS, RTS, DSR, DTR, RI, CD).
3. Ordering information
Table 1: Ordering information
Type number Package
Name Description Version
SC16C654BIA68 PLCC68 plastic leaded chip carrier; 68 leads SOT188-2
SC16C654BIB64 LQFP64 plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm SOT314-2
SC16C654BIBM LQFP64 plastic low profile quad flat package; 64 leads; body 7 × 7 × 1.4 mm SOT414-1
SC16C654BIBS HVQFN48 plastic thermal enhanced very thin quad flat package; no leads;
48 terminals; body 6 × 6 × 0.85 mm
SOT778-3
SC16C654BIEC LFBGA64 plastic low profile fine-pitch ball grid array package; 64 balls;
body 6 × 6 × 1.05 mm
SOT686-1
SC16C654DBIB64 LQFP64 plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm SOT314-2
9397 750 14965 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 02 — 20 June 2005 3 of 58
Philips Semiconductors
SC16C654B/654DB
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
4. Block diagram
Fig 1. Block diagram of SC16C654B/654DB (16 mode)
DTRA to DTRD
RTSA to RTSD
TRANSMIT
FIFO
REGISTERS
TXA to TXD
RECEIVE
SHIFT
REGISTER
RECEIVE
FIFO
REGISTERS
RXA to RXD
INTERCONNECT BUS LINES
AND
CONTROL SIGNALS
SC16C654B/654DB
TRANSMIT
SHIFT
REGISTER
XTAL2XTAL1
002aaa871
INTSEL
FLOW
CONTROL
LOGIC
CLKSEL
16/68
DATA BUS
AND
CONTROL
LOGIC
REGISTER
SELECT
LOGIC
INTERRUPT
CONTROL
LOGIC
D0 to D7
IOR
IOW
RESET
A0 to A2
CSA to CSD
INTA to INTD
TXRDY
RXRDY
CLOCK AND
BAUD RATE
GENERATOR
MODEM
CONTROL
LOGIC
CTSA to CTSD
RIA to RID
CDA to CDD
DSRA to DSRD
FLOW
CONTROL
LOGIC
IR
DECODER
IR
ENCODER

SC16C654DBIB64,151

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
UART Interface IC 4CH. UART 64B FIFO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union